{"title":"Electric Scooter Battery Charger Store","description":"An electric scooter charger from Monster Scooter Parts is one of the most important parts of your scooter’s electrical system, second only to the scooter’s battery. The electric scooter battery charger is responsible for maintaining the power level of your scooter and is absolutely necessary for extended use of the application. Our large selection of electric scooter chargers covers many makes and models of electric scooters and power chairs, and our chargers are always priced competitively.  Monster Scooter Parts has an electric scooter charger for every need; from the always popular XLR chargers used on many mobility and recreational scooter applications to the 12 volt direct connect trickle chargers, we are confident we have you’re searching for.\u003cbr\u003e\u003cbr\u003e\n\nAs mentioned previously, the electric scooter battery charger is directly responsible for supplying power to your scooter’s battery. But how does the electric scooter charger do this? In general, a home wall outlet supplies alternating current (AC) of varying voltages, but a sealed lead acid battery can only be charged with direct current (DC) of specific voltage. The transforming circuits inside the electric scooter charger convert the current from AC to DC, whilst simultaneously stepping down the voltage and amperage to the recommended levels for your battery and scooter.\u003cbr\u003e\u003cbr\u003e\n\nSupplying AC directly to your battery is a surefire way to damage or destroy the battery cells, and quite possibly destroy your entire scooter through fire or electric overload. Likewise, using electric scooter chargers with the incorrect voltage or amperage output can either drastically overcharge the battery (thus limiting its available lifespan) or fail to charge the battery at all. Because of this, it is incredibly important that you are careful to select the appropriate electric scooter battery charger for your application.\u003cbr\u003e\u003cbr\u003e\n\nMonster Scooter Parts has a fully trained and knowledgeable staff available to answer any questions you have about selecting the appropriate electric scooter charger for your application, available Monday through Saturday (excluding holidays). Please contact our customer service department for assistance.","products":[{"product_id":"24vo2bach","title":"24 Volt 1.6 Amp 2-Prong Battery Charger (Standard)","description":"If you have a Rad2Go, Sola, or X-Treme electric scooter with a 2-prong connector port, then you may want this 24 volt 1.6 amp 2-prong battery charger. Now you can keep your scooter up and running with our standard 2-prong scooter charger.\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"https:\/\/www.monstorscooterparts.shop\/media\/site\/2prongslarge.jpg\"\u003e\u003cimg src=\"https:\/\/www.monstorscooterparts.shop\/media\/site\/2prongssmall.jpg\"\u003e\u003c\/a\u003e\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\nThis little scooter battery charger features a multi-color LED that indicates when charging is complete, the batteries are good to go, and your electric scooter is ready to resume its scooting. The 2-prong female connector such as the one on this charger is typically used on smaller scooters such as the ones listed on our Compatibility tab. Please refer to the picture for a better view of the connector.\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336761929890,"sku":"A54-6198","price":15.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/a54-6198_1.jpg?v=1774744222"},{"product_id":"24vo8ampagxl","title":"24 Volt 8.0 Amp XLR 24BC8000T-1 Battery Charger","description":"Weighing in at a robust 6 lbs., this 24 volt 8 amp XLR 24BC8000T-1 battery charger is no lightweight plastic contraption. This charger for sealed lead-acid (SLA) batteries is made by Universal Power Group (UPG), a very respected manufacturer of top-quality batteries and chargers for the medical and mobility industry. So trusted is this charger that Invacare offers it as original equipment on a number of their power chair models.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Power On\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Fast Charge\u003cbr\u003e\n\u003ci\u003eOrange\u003c\/i\u003e - Top Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Full Charge\u003cbr\u003e\n\u003ci\u003eBlue\u003c\/i\u003e - Disconnected\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 16 volts of power.\u003cbr\u003e\n\u003cbr\u003e\nUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\n\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\nPlease note that the instructions you receive with this battery charger may state \"suitable for lead acid batteries only.\" Do not be confused by this. AGM and GEL batteries are both forms of sealed \"lead acid\" batteries. Therefore, this battery charger is fully compatible with both AGM and GEL batteries, although it is optimized for use with AGM batteries.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC8000T-1\u003cbr\u003e\n\u003cb\u003eDrive Medical\u003c\/b\u003e: G6942W31\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1123249\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: ELEASMB5669","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336783163554,"sku":"C04-1150","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24vo8ampagxl_4.jpg?v=1774748716"},{"product_id":"24v-4a-agm-gel-xlr-charger","title":"24 Volt 4.0 Amp XLR 4C24040 AGM\/Gel Mobility Battery Charger","description":"Here is a great battery charger. The 24 volt, 4 amp 4C24040 battery charger from MK is made to be used with sealed absorbed Glass Mat (AGM), traditional wet-cell lead acid (SLA), or gel batteries. It may be used with 115 or 230 AC voltage supply and is switchable between the two.\u003cbr\u003e\u003cbr\u003eThe MK 4C24040 includes the 3-prong male XLR connector one one end, and a standard 110V AC connector which can be plugged into any standard wall outlet.\u003cbr\u003e\u003cbr\u003eThis charger is used with scooters or power wheelchairs with lower capacity batteries such as very common U-1 size. It is fully automatic with L.E.D.'s that signal the charging and ready stages.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003ci\u003eRed\u003c\/i\u003e - Power On\u003cbr\u003e\u003ci\u003eOrange\u003c\/i\u003e - Charging\u003cbr\u003e\u003ci\u003eGreen\u003c\/i\u003e - Full Charge\u003cbr\u003e\u003ci\u003eOff\u003c\/i\u003e - Disconnect\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eMK Battery\u003c\/b\u003e: 4C24040","brand":"MK Battery","offers":[{"title":"Default Title","offer_id":44336783196322,"sku":"C04-1154","price":141.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-4a-agm-gel-xlr-charger_4.jpg?v=1774748731"},{"product_id":"24v-8a-agm-gel-xlr-charger","title":"24 Volt 8 Amp XLR AGM\/Gel Mobility Battery Charger","description":"When you require a truly superlative battery charger to keep your mobility scooter or power chair topped off and up to snuff, This 24 volt 8 amp XLR 24BC8000T-4 battery charger for both Gel and Absorbed Glass Mat (AGM) batteries. This highest-quality charger is made by UPG, and it is a world away from the typical lightweight plastic imported chargers offered by the scooter brands. So trusted is this charger that Invacare offers it as original equipment on a number of their power chair models.\u003cbr\u003e\u003cbr\u003e\nThe 24 volt 8.0 amp XLR connector battery charger from UPG is suitable for the 17 Ah batteries or larger that are used on mobility scooters and power chairs equipped with an off-board charging female XLR socket. They use a convenient automatic shut off when the charging cycle is complete. Note that your charging time may vary depending on how depleted or drained down your battery is.\u003cbr\u003e\n\u003cbr\u003e\nThis battery charger features an automatic shut off when battery charging is complete. In addition, the selector switch must be set to Gel or AGM depending on the battery type to be charged.\u003cbr\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - Displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 9 volts of power.\u003cbr\u003e\n\u003cbr\u003e\nUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC8000T-4","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336783229090,"sku":"C04-1153","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/C04-12371.jpg?v=1774748736"},{"product_id":"24-volt-2-0-amp-xlr-ql-09005-b2402000h-battery-charger","title":"24 Volt 2.0 Amp XLR Battery Charger","description":"When you want a premium quality 24 volt 2.0 amp (2000 mA) XLR connector battery charger at the best price around, you will want this AlveyTech Charger. This economical but dependable charger is suitable to use on sealed lead acid (SLA) batteries with the capacity of 7 Ah or larger.\u003cbr\u003e\n\u003cbr\u003e\nTypical applications for this charger include mobility scooters, and power chairs equipped with an off-board charging female XLR socket. This is the most common type used in the industry. The charger also features an automatic shut off when battery charging is complete. The charging time may vary with level of battery depletion.\u003cbr\u003e\n\u003cbr\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed. \u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e \n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition. \u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode. \u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float. \u003c\/li\u003e\n\u003cli\u003eLED Display \u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\u003cbr\u003e\n\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Charged","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44336783524002,"sku":"C04-1155","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/C04-1155-1.jpg?v=1782424007"},{"product_id":"24-volt-5-amp-portable-xlr-battery-charger-guest-marinco","title":"24 Volt 5.0 Amp Portable XLR Battery Charger (1148830)","description":"\u003cp\u003eKeep your scooter charged wherever you go with this portable 24 volt 5.0 amp XLR battery charger. Made by C.T.M., this is a first-class battery charger that offers a built-in electronic overload and thermal protection, as well as easy to read LED light indicators.\u003cbr\u003e\u003cbr\u003eThis excellent XLR battery charger is compatible with most mobility chairs and power scooters that use XLR connectors.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1148830\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336783556770,"sku":"C04-1158","price":323.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24-volt-5-amp-portable-xlr-battery-charger-guest-marinco_1.jpg?v=1774748782"},{"product_id":"24-volt-2-amp-xlr-battery-charger-car-cigarette-lighter-dc-input-standard","title":"24 Volt 1.5 Amp XLR Battery Charger with Car Cigarette Lighter DC Input","description":"Always be on the go with this standard 24 volt XLR battery charger car cigarette lighter. This charger does not have the usual household AC connector plug, but a car's cigarette lighter style plug that allows you the ease and convenience of recharging your power chair or scooter battery from your automobile even when you are out and about.\u003cbr\u003e\n\u003cbr\u003e\nThe long cord will easily stretch from your scooter to the car's cigarette lighter plug, so wherever and whenever you go out in the car, you can keep your scooter moving, too.\u003cbr\u003e\n\u003cbr\u003e\nThis charger is suitable for use on sealed lead acid (SLA) batteries of size 7 Ah or larger.  Typically this charger could be used with electric scooters, mobility scooters, and power chairs equipped with an off-board charging female XLR socket.\u003cbr\u003e\n\u003cbr\u003e\nThe charger is equipped with an automatic shut off when battery charging is complete. Keep in mind that charging time varies greatly with level of battery depletion.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336783687842,"sku":"C04-1162","price":20.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1162_5.jpg?v=1774748793"},{"product_id":"24vo20ampxlr","title":"24 Volt 2.0 Amp XLR 24BC2000T-4 Battery Charger (S31055)","description":"Our premium quality 24 volt 2.0 amp XLR connector battery charger is suitable for use on sealed lead acid (SLA) batteries with a capacity size of 7 Ah or larger. Typical applications include electric scooters, mobility scooters, and power chairs equipped with an off-board charging female XLR socket. Comes with 3-prong adapter plug.\u003cbr\u003e\u003cbr\u003e\nAutomatic shut off when battery charging is complete. Charging time varies greatly with level of battery depletion.\u003cbr\u003e\u003cbr\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. the final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display\u003c\/li\u003e\n\u003cli\u003eLight Weight - Switch mode chargers are much lighter than linear chargers.\u003c\/li\u003e\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eA. POWER LED\u003c\/b\u003e (Clear Lens - Red Color):\n\u003cli\u003e\n\u003ci\u003ePower On\u003c\/i\u003e - LED On\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003eNo Power\u003c\/i\u003e - LED Off\u003c\/li\u003e\u003cbr\u003e\n\u003cb\u003eB. CHARGING\/FAULTS LED\u003c\/b\u003e - (Clear Lens - Red \/ Green Color):\n\u003cli\u003e\n\u003ci\u003ePower OnNo Battery\/Full Charge (20 Hrs)\u003c\/i\u003e - Both LED's Off\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003eBulk \/Absorption Charge\u003c\/i\u003e -  Red LED  On - Green LED Off\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003eFloat Charge\u003c\/i\u003e - Red LED Off - Green LED Blinking\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003eMaintenance Charge\u003c\/i\u003e - Red LED Off - Green LED  On\u003c\/li\u003e\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cfont color=\"red\"\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e The Low Voltage Protection feature on this battery charger will not allow the charger to activate unless it is connected to a battery pack that has a minimum voltage of 16 volts. Battery packs with voltages below that level of charge cannot be recovered or recharged. This is a safety feature to prevent overheating in the event of a faulty battery. This battery charger will not output any voltage to the XLR connector until connected to a battery pack meeting this minimum voltage requirement.\u003c\/font\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC2000T-4","brand":"Universal Power Group","offers":[{"title":"Default Title","offer_id":44336783786146,"sku":"C04-1163","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc00720_-_mockup_1_3131220_4.jpg?v=1774748811"},{"product_id":"24vo18ampxlr","title":"24 Volt 2.0 Amp XLR Battery Charger (Standard)","description":"The 24 volt 2.0 amp XLR is a standard electric scooter battery charger that is suitable on virtually all scooters that use the common XLR connector.  Its output specifications match or exceed the factory supplied original equipment manufacturer's (OEM) specifications for the charger that came with a new scooter.\u003cbr\u003e\n\u003cbr\u003e\nThe charger features multiple LED lights to indicate the battery charge status, and an automatic shut off when charging is complete.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336783818914,"sku":"C04-1165","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1165_1.jpg?v=1774748822"},{"product_id":"24vo40ampxlr","title":"24 Volt 4.0 Amp XLR HP8204B Battery Charger","description":"Are you looking for an excellent XLR battery charger? Monster Scooter Parts offers this premium quality 24 volt 4.0 amp XLR HP8204B battery charger made by High Power, a very respected name in the battery charger field. Our charger is compatible with many mobility scooters and power wheelchairs that use off-board chargers with the XLR style charging connectors.\u003cbr\u003e\n\u003cbr\u003e\nThis is a quick-charge battery charger that can recharge 24 volt battery packs in half the time that it takes  a standard charger to do. It features 115-Volt input, 4.0 Amp output, and an automatic shutoff when battery is charged.\u003cbr\u003e\n\u003cbr\u003e\nThis High Power battery charger can be used used on standard electric scooters as well as electric mobility scooters with large sealed lead acid scooter batteries (18 Ah batteries and above). The charger is equipped with an included 10 amp GMA fuse.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\n\u003ci\u003eRed\u003c\/i\u003e - Power On\u003cbr\u003e\n\n\u003ci\u003eYellow\u003c\/i\u003e - Charging\u003cbr\u003e\n\n\u003ci\u003eGreen\u003c\/i\u003e - Full Charge\u003cbr\u003e\n\n\u003ci\u003eOff\u003c\/i\u003e - Disconnect\u003cbr\u003e\n\u003cbr\u003e\nUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP8204B","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336783851682,"sku":"C04-1166","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24vo40ampxlr_4.jpg?v=1774748837"},{"product_id":"36vo1ampxlrb","title":"36 Volt 1.5 Amp XLR Battery Charger","description":"\u003cp\u003eOur premium quality 36 volt 1.5 amp output electric scooter battery charger is suitable for virtually all 36 volt scooters and electric bikes that use the XLR connector.\u003cbr\u003e\u003cbr\u003eThis 36 volt battery charger by Qili Power is the original equipment manufacturer charger on all Razor MX500 and MX650 electric dirt bikes, Razor EcoSmart Metro electric scooters, as well as Schwinn, Mongoose, GT, and IZIP 600-1000 series scooters.\u003cbr\u003e\u003cbr\u003eThe multiple LEDs indicate the battery charge level. There is also an automatic shut off when charging is complete.\u003cbr\u003e\u003cbr\u003eUnderwriters Laboratories (UL®) Listed. Dry location use only.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003eGreen: \u003ci\u003eCharged OK\u003c\/i\u003e\u003cbr\u003eRed: \u003ci\u003eCharging\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44336783884450,"sku":"C04-1168","price":22.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/C04-1168-1.jpg?v=1774748854"},{"product_id":"24vo15ampxlr","title":"24 Volt 1.5 Amp XLR Battery Charger","description":"Our premium quality 24 volt battery charger is made by AlveyTech, a very respected brand name in battery charger technology. This excellent battery charger uses a standard XLR connector plug. It is suitable for virtually any scooter or electric power chair that uses the XLR connector port and a 24 volt 1.5 amp battery charging system.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This battery charger is made to be used with Absorbed Glass Mat (AGM) lead batteries only. It is not compatible with Lithium-ion batteries.\n\u003cbr\u003e\u003cbr\u003e\nThere is an automatic shut off for when battery charging is complete. Your charging time on a 24 volt 1.5 amp XLR charger may vary depending on the level of your battery's depletion. All premium quality 24 volt battery chargers are Underwriters Laboratories (UL) Listed.  Dry locations only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Charged","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44336783949986,"sku":"C04-1167","price":22.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1167_4.jpg?v=1774748878"},{"product_id":"36v1xlrbach","title":"36 Volt 1.8 Amp XLR Battery Charger (Standard)","description":"Need a 36 volt battery charger for your electric scooter? Keep your scooter up and running with our standard 36 volt 1.8 amp XLR battery charger, a great choice for an affordable scooter part.\u003cbr\u003e\n\u003cbr\u003e\nThe 36 volt scooter charger is compatible with a variety of electric scooter models. Equipped with an XLR connector, this 36 volt scooter charger is an economic solution to your charging.\u003cbr\u003e\n\u003cbr\u003e\nPlease see our compatibility page for a complete list of compatible scooter models that use a 3-prong battery charger.\u003cbr\u003e\n\u003cbr\u003e\nThe output specifications will match or exceed factory supplied original equipment manufacturer's (OEM) specifications.  Multiple LED lights indicate the battery charge status, and an automatic shut off when charging is complete.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336783982754,"sku":"C04-1169","price":18.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1169_8.jpg?v=1774748887"},{"product_id":"24vo40ampxlr1","title":"24 Volt 1.6 Amp XLR Battery Charger (Standard)","description":"Here is our standard 24 Volt battery charger for electric scooters. This 24 volt 1.6 Ah battery charger is suitable for virtually all scooters that use the XLR connector.  Output specifications match or exceed factory supplied original equipment manufacturer's (OEM) specifications. LED light indicates battery charge status.  Automatic shut off when charging is complete.\u003cbr\u003e\n\u003cbr\u003e\nThis 24 volt battery charger works with a large number of scooters. The XLR connector is a popular fitting on today's electric scooters. Please look through the Compatibility tab to see if your scooter uses this standard DC 24v 1.6 Ah charger.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336784048290,"sku":"C04-1171","price":14.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/C04-1171-1.jpg?v=1774748908"},{"product_id":"24-volt-2-5-amp-xlr-battery-charger-standard","title":"24 Volt 2.5 Amp XLR Battery Charger (Standard)","description":"\u003cp\u003eElectric scooter battery charger. 24 volt 2.5 amp XLR connector battery charger used on electric scooters, power chairs, and mobility scooters.\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336784146594,"sku":"C04-1172","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/wanto24vo25a.jpg?v=1774748935"},{"product_id":"hipo24v3xlrc","title":"24 Volt 3.0 Amp XLR HP8208N2 Ni-MH Electric Bike Battery Charger","description":"Here is our Nickel Metal Hydride series HP8208N2 electric bike battery charger from High Power. This electric bike charger includes one XLR connector as well as a standard 110V AC connector which can be plugged into any standard outlet.\u003cbr\u003e\n\u003cbr\u003e\nCurrie Technologies uses this e-bike charger on some of their popular models. You can use this as a  direct replacement for Mongoose and IZIP \u003cb\u003eNi-MH\u003c\/b\u003e electric bicycles. The e-bikes that use this charger are usually identified by having \"Enlightened\" in the model name, and were made in 2007.\u003cbr\u003e\n\u003cbr\u003e\nThis electric bike battery charger is also compatible with mobility scooters equipped with an offboard charger and Ni-MH batteries, such as the UltraLite AutoGo Vision. All in all, the HP8208N2 is a very useful e-bike charger indeed.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Power On\u003cbr\u003e\n\u003ci\u003eYellow\u003c\/i\u003e - Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Full Charge\u003cbr\u003e\n\u003ci\u003eOff\u003c\/i\u003e - Disconnect\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eCurrie Technologies\u003c\/b\u003e: AU-2406-N\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP8208N2","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336784179362,"sku":"C04-1173","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/hipo24v3xlrc_3.jpg?v=1774748940"},{"product_id":"24vo50ampxlr","title":"24 Volt 5.0 Amp XLR 24BC5000T-4 AGM\/Gel Battery Charger (CPC)","description":"\u003cp\u003eOur 24 volt 5.0 amp XLR connector battery charger from Universal Power Group (UPG) is an excellent way to keep your mobility scooter or power chair fully charged up and ready to go. Unlike most battery chargers, this charger is suitable for use on both standard AGM and Gel cell batteries. A convenient switch on the charger allows you to shift from one to the other.\u003cbr\u003e\u003cbr\u003eThe 24 volt 5.0 amp XLR connector battery charger from UPG is suitable for the 17 Ah batteries or larger that are used on mobility scooters and power chairs equipped with an off-board charging female XLR socket. They use a convenient automatic shut off when the charging cycle is complete. Note that your charging time may vary depending on how depleted or drained down your battery is.\u003cbr\u003e\u003cbr\u003eFully compatible as a replacement for model HP8204B battery charger. Automatic shut off when battery charging is complete. Charging time varies greatly with level of battery depletion.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e Note: The selector switch must be set to GEL or AGM depending on the battery type to be charged. Caution: Only use this charger on Sealed Lead Acid (SLA) batteries. Not compatible with lithium batteries.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - 3 LED displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003eMonster Scooter Parts is proud to announce a full 1-year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003ePlease note that the instructions you receive with this battery charger may state \"suitable for lead acid batteries only.\" Do not be confused by this. AGM and GEL batteries are both forms of sealed \"lead acid\" batteries. Therefore, this battery charger is fully compatible with both AGM and GEL batteries, although it is optimized for use with AGM batteries.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 18 volts of power.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC5000T-4 (replaces 24BC5000TF-1)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eVoltage: 24V\u003cbr\u003eAmperage: 5A\u003cbr\u003eConnector: XLR\u003cbr\u003eApplication: Sealed Lead Acid (SLA) or Gel\u003cbr\u003eModel Number: 24BC5000T-4\u003cbr\u003eManufacturer: Universal Power Group \u003cbr\u003eERAC Certification: BAA-172133-EA\u003cbr\u003eETL Certified: EP5020506\u003cbr\u003eUL Certified: UL 1012 (E245476)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Universal Power Group","offers":[{"title":"Default Title","offer_id":44336784212130,"sku":"C04-1175","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1175_4.jpg?v=1774748947"},{"product_id":"24vo50ampxlr1","title":"24 Volt 5.0 Amp XLR  AGM\/Gel Battery Charger (24BC5000TFG-1 Replacement) (CPC)","description":"Advanced 3-Stage Switch Mode Series Charger., Model 24BC5000T-4 (replaces 24BC5000TFG-1)\u003cbr\u003e\n\u003cbr\u003e\nThis 24 Volt 5.0 Amp XLR Gel Cell battery charger from Universal Power Group (UPG) is an excellent and economical way to keep your Gel batteries charged.\u003cbr\u003e\n\u003cbr\u003e\nDeep cycle Gel Cell batteries are usually longer lasting but are more sensitive to being overcharged. Using an AGM style charger on Gel Cell batteries is a sure fire way to guarantee their poor performance and premature failure. Our Gel Cell battery charger has an output range of 28.8 volts, making it safe to use with AGM as well.\u003cbr\u003e\n\u003cbr\u003e\nIn brief, while an AGM optimized charger should never be used with Gel batteries, a charger optimized for Gel batteries will work with either, although the charging rate will be slower. These differences in voltages are not absolutely required for the two battery types, but are the recommended charging voltages. \u003cb\u003eNote:\u003c\/b\u003e The selector switch must be set to GEL or AGM depending on the battery type to be charged.\u003cbr\u003e\n\u003cbr\u003e\nThe charger features an automatic shut off when the battery charging cycle is complete. The charging time varies greatly with the level of battery depletion. This charger is Underwriters Laboratories (UL) Listed for dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. the final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - 3 LED displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLight Weight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\u003cbr\u003e\n\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\nPlease note that the instructions you receive with this battery charger may state \"suitable for lead acid batteries only.\" Do not be confused by this. GEL and AGM batteries are both forms of sealed \"lead acid\" batteries. Therefore, this battery charger is fully compatible with both AGM and GEL batteries, although it is optimized for use with GEL batteries.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC5000T-4  (replaces 24BC5000TFG-1)","brand":"Universal Power Group","offers":[{"title":"Default Title","offer_id":44336784277666,"sku":"C04-1176","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1175_4_4.jpg?v=1774748968"},{"product_id":"sh","title":"24 Volt 2.0 Amp XLR GC99D060028, SA60-3015U Battery Charger for Shoprider Featherlite and Smartie Lithium Batteries (109201-88805)","description":"Shoprider Smartie owners take note. We carry the fully automatic 24 volt 2.0 amp XLR connector battery charger from Pihsiang. This charger is the factory original (OEM) battery charger for \u003ca href=\"http:\/\/www.monstorscooterparts.shop\/shsm.html\"\u003eShoprider Smartie\u003c\/a\u003e power chairs with lithium batteries. Please note your Pihsiang charger model may say GC99D060028 or SA60-3015 on the case. These two numbers are for the same charger. \u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cfont color=\"green\"\u003eGREEN\u003c\/font\u003e\u003c\/b\u003e: Power on (when not connected to batteries)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cfont color=\"red\"\u003eRED\u003c\/font\u003e:\u003c\/b\u003e Charging\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cfont color=\"green\"\u003eGREEN\u003c\/font\u003e:\u003c\/b\u003e Fully charged\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eTroubleshooting:\u003c\/b\u003e\u003cbr\u003e\n1. If the LED light is \"OFF\" all the time while charging:\n\u003cul\u003e\n\u003cli\u003eCheck if the power connections are in good condition. If the LED light is still off all the time while charging, the battery charger may be malfunctioning.\u003c\/li\u003e\n\u003cli\u003ePlease consult your authorized dealer for further assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n2. If the LED light does not switch from GREEN to RED when the charging process begins:\n\u003cul\u003e\n\u003cli\u003eCheck if the connection of the battery polarity is correct.\u003c\/li\u003e\n\u003cli\u003eCheck if the connection between output plug and the battery connector is correct.\u003c\/li\u003e\n\u003cli\u003eCheck if the batteries are already fully charged.\u003c\/li\u003e\n\u003cli\u003eCheck if the batteries are connected properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n3. The charging time continues for a long duration (irregular):\n\u003cul\u003e\u003cli\u003eCheck if the battery is out of order or aged.\u003c\/li\u003e\u003c\/ul\u003e\n4. The battery overheats:\n\u003cul\u003e\n\u003cli\u003eCheck the battery specification or consult your authorized dealer.\u003c\/li\u003e\n\u003cli\u003eStop charging immediately and check if there is a problem with the charger or the batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\nUnderwriters Laboratories (UL®) Listed. Dry location use only.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003e\u003cfont color=\"red\"\u003eThis charger is to be used for charging Shoprider scooters with Lithium battery packs by Pihsiang only. Use with any other scooter models or battery types will damage your batteries.\u003c\/font\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: 109201-88805\u003cbr\u003e\n\u003cb\u003ePihsiang\u003c\/b\u003e: GC99D060028, SA60-3015U","brand":"Pihsiang","offers":[{"title":"Default Title","offer_id":44336784638114,"sku":"C04-1181","price":133.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1181_4.jpg?v=1774748638"},{"product_id":"24-volt-3-amp-xlr-battery-charger-upg","title":"24 Volt 3.5 Amp XLR 24BC3500T-4 Battery Charger","description":"\u003cp\u003eThe 24 volt 3.5 amp XLR battery charger by Universal Power Group (UPG) is one of the very best values in an all-around XLR charger with a broad range of mobility applications. Check Compatibility list for known compatible models.\u003cbr\u003e\u003cbr\u003eThis three stage mobility scooter battery charger comes with an automatic shutoff feature. It is also worth noting that this 24 volt charger is equipped with a safety feature which prevents it from charging batteries that are under 13.2 volts.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eA. POWER LED\u003c\/b\u003e (dual color):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003eRed - Power On\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eGreen - Charging Battery\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eB. CHARGING LED\u003c\/b\u003e (Red):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003eLED on - Fast Charge\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eLED off - Float Charge\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003eMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eVoltage: 24V\u003cbr\u003eAmperage: 3.5A\u003cbr\u003eConnector: XLR\u003cbr\u003eApplication: Sealed Lead Acid (SLA)\u003cbr\u003eModel Number: 24BC3500T-4\u003cbr\u003eManufacturer: Universal Power Group\u003cbr\u003eERAC Certification: SAA-172136-EA\u003cbr\u003eETL Certified: EP5020506\u003cbr\u003eUL Certified: UL 1012 (E245476)\u003c\/p\u003e","brand":"Universal Power Group","offers":[{"title":"Default Title","offer_id":44336784998562,"sku":"C04-1197","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24-volt-3-amp-xlr-battery-charger-upg_3.jpg?v=1774749287"},{"product_id":"24v-2a-xlr-battery-charger-high-power","title":"24 Volt 2.0 Amp XLR HP1202B Battery Charger","description":"The premium quality 24 volt 2.0 amp XLR connector battery charger is an excellent choice. This High Power HP1202B battery charger is suitable for use on sealed lead acid (SLA) batteries of size 7 Ah or larger. Typical applications include electric scooters, mobility scooters, and power chairs equipped with an off-board charging female XLR socket. It comes with 3-prong adapter plug.\u003cbr\u003e\n\u003cbr\u003e\nThe High Power HP1202B features an automatic shut off when the battery charging cycle is complete. Your charging time may vary according to the level of battery depletion. The charger features LED indicator lights and included power cord.\u003cbr\u003e\n\u003cbr\u003e\nWhile this charger is compatible with many different models of mobility scooters and power chairs, this charger was used as the factory original charger for many ActiveCare scooter models.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eThe LED indicator lights show the battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Power On\u003cbr\u003e\n\u003ci\u003eRed\/Green\u003c\/i\u003e - Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Charged\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eActiveCare\u003c\/b\u003e: LRM302111\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP1202B","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336785162402,"sku":"C04-1198","price":58.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-2a-xlr-battery-charger-high-power_5.jpg?v=1774749314"},{"product_id":"24-volt-8-0-amp-xlr-hp0240wb-compact-battery-charger","title":"24 Volt 8.0 Amp XLR HP0240WB Compact Battery Charger","description":"This premium quality 24 volt 8.0 amp XLR compact battery charger from High Power, model number HP0240WB is a lot of power in a small package. High Power has set the industry standard for high-quality chargers at easy-to-afford prices, and this 8.0 amp XLR charger is no exception to that rule. It may be smaller in overall dimensions than many standard 8.0 amp chargers, but it packs the same battery-charging wallop as the bigger, heavier models.\u003cbr\u003e\n\u003cbr\u003e\nThis XLR battery charger is compatible with many different makes and models of mobility scooters and electric power chairs. If your mobility vehicle uses U1 or larger batteries, and requires a charger with the ubiquitous XLR connector, then this is a wise choice in chargers.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote A:\u003c\/b\u003e This is a powerful 24 volt battery charger. It is recommended that a 24 volt 8.0 amp charger should only be used on 24 volt battery packs with 31 amp-hour ratings or higher, (U1 and above). Using this powerful battery charger on smaller batteries risks damage to your property.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote B:\u003c\/b\u003e This is a high-demand battery charger and may be temporarily out of stock. If that is the case when you need it, we strongly recommend our \u003ca href=\"http:\/\/www.monstorscooterparts.shop\/24vo8ampagxl-c04-1237.html\"\u003e24 Volt 8.0 Amp XLR 24BC8000T-4 Battery Charger\u003c\/a\u003e as a great substitute.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP0240WB","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336785293474,"sku":"C04-1199","price":118.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1199_1.jpg?v=1774748991"},{"product_id":"24v-8a-xlr-charger-trupower","title":"24 Volt 8.0 Amp XLR EA1230B (A24080-10D) Battery Charger","description":"Our 24 Volt 8.0 Amp XLR battery charger is made by Battery Maximizer and is a very good choice for those who demand superior quality without breaking the budget. Battery Maximizer calls this charger their EA1230B (A24080-10D), and this 24 volt 8.0 amp XLR beauty offers its excellent performance on an wide variety of mobility scooters and power chair brands and models. Please see the extensive (though by no means definitive) list of mobility products that will accept from this battery charger's volt\/amp combination.\u003cbr\u003e\n\u003cbr\u003e\nThis powerful UL\/CUL CE listed charger uses the 3-pin XLR connector as well as a standard 110V AC plug which can be plugged into any standard household outlet. Battery Maximizer designed this powerful charger to properly recharge VRLA, SLA, AGM, and Gel lead-acid batteries without having to worry about overcharging.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Power On\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eRed\u003c\/i\u003e - Fast Charge\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - AC Connection\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Ready\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Error, Short Circuit, Leads Reversed\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eRed\u003c\/i\u003e - Battery Disconnected, Battery Under 5 Volts\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\n\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eBattery Maximizer Model:\u003c\/b\u003e EA1230B (A24080-10D)\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eBattery Maximizer\u003c\/b\u003e: EA1230B (A24080-10D)","brand":"Battery Maximizer","offers":[{"title":"Default Title","offer_id":44336785326242,"sku":"C04-1201","price":185.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-8a-xlr-charger-trupower_4.jpg?v=1774749001"},{"product_id":"36v-3amp-xlr-li-ion-charger","title":"36 Volt 3.0 Amp XLR Lithium-ion HP1202L3 Battery Charger","description":"Here is an item that is perfect for today's e-bikes and 36 volt scooters; our 36 volt, 3.0 amp XLR Lithium-ion (or Li-ion) battery charger from High Power.\u003cbr\u003e\u003cbr\u003eThis charger has been optimized for the fast recharging of the popular and lightweight lithium-ion batteries found on top-end electric bikes and scooters.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e This 36 volt 3.0 amp XLR battery charger should only be used on 36 volt Lithium-ion battery systems. It will NOT work with 4-pin XLR charger ports, 24 volt systems, or with regular Sealed Lead Acid (SLA) batteries. Trying to so may damage the charger, your scooter, or e-bike's batteries, or both.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Indicator:\u003c\/b\u003e \u003cli\u003eYellow: Charging\u003c\/li\u003e                      \u003cli\u003eGreen: Full Charge\u003c\/li\u003e                        \u003cli\u003eRed: Power On\u003c\/li\u003e                        \u003cli\u003eRed Flash: Repair charging for low voltage Battery\u003c\/li\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP1202L3","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336785555618,"sku":"C04-1200","price":68.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1200_1.jpg?v=1774749014"},{"product_id":"36-volt-4-amp-xlr-4-li-ion-battery-charger-currie","title":"36 Volt 4.0 Amp XLR-4 HP8204L Li-ion Electric Bike Battery Charger","description":"This High Power model HP8204L 36 volt 4.0 amp XLR-4 Li-ion electric bike battery charger is the factory OEM standard charger on a number of IZIP electric bikes.\u003cbr\u003e\n\u003cbr\u003e\nIZIP has earned an enviable reputation as a leader in e-bike technology, due in no small part to their embracing Lithium-ion battery packs for their top-end models. As IZIP is the leader in electric bike technology, so is High Power in the world of personal vehicle battery chargers.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This 36 volt 4.0 amp XLR-4 Li-ion electric bike battery charger should only be used on 36 volt Lithium-ion battery systems. It will NOT work with 3-pin XLR charger ports, 24 volt systems, or with regular Sealed Lead Acid (SLA) batteries. Trying to so may damage the charger, your e-bike's batteries, or both.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eCurrie Technologies\u003c\/b\u003e: CH-3604-001\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP8204L","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336785621154,"sku":"C04-1203","price":148.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1203_4.jpg?v=1774749039"},{"product_id":"24-volt-2-0-amp-xlr-li-ion-hp0060wl2-battery-charger-for-electric-bikes","title":"24 Volt 2.0 Amp XLR Li-ion HP0060WL2 Battery Charger for Electric Bikes","description":"Are you looking for a Li-ion e-bike charger that won't break the bank? If so we recommend our 24 Volt 2.0 Amp XLR Li-ion HP0060WL2 battery charger for electric bikes. Made by High Power, a leader in battery charger technology. This charger may have a very economical price tag, but it is a rock-solid performer.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePlease note that this charger is only for use with Li-ion battery systems.\u003c\/b\u003e  Using this model to charge regular sealed lead acid (SLA) batteries may result in personal injury and damage to the batteries.\u003cbr\u003e\u003cbr\u003eLithium-ion  (Li-ion) batteries have revolutionized battery technology and they have made the modern e-bike lighter, faster, and able to get a much greater between-charge endurance. This XLR charger is an excellent budget-conscious choice for charging eZip, IZIP, and just about any other brand of e-bikes using the 24 volt Li-ion system.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe LED indicator lights show the battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003ci\u003eRed - Power On\u003c\/i\u003e\u003cbr\u003e\u003ci\u003eRed\/Green - Charging\u003c\/i\u003e\u003cbr\u003e\u003ci\u003eGreen - Charged\u003c\/i\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP0060W(L2)","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336785686690,"sku":"C04-1204","price":84.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-2a-xlr-li-ion-battery-charger-high-power_4.jpg?v=1774749042"},{"product_id":"36v-mini-3prong-lithium-battery-charger-qili","title":"36 Volt Lithium Battery Charger for Self-Balancing Hoverboards with Mini 3-Prong Connector","description":"If you have a self-balancing scooter (or \"hoverboard\") with a Lithium-ion (Li-ion) battery system, you need a charger designed specifically for it. This hoverboard charger has a unique mini 3-prong connector that is significantly smaller in diameter than the standard 3-prong connector used on most other electric scooters. This is by design to prevent using non-Li-ion chargers to charge Li-ion systems and vice versa. In addition, this battery charger is to be used for charging Lithium-ion (Li-ion) battery packs only. Use with any other battery types will damage your batteries.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eBattery Power Level Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eSolid Green:\u003c\/b\u003e Battery power level is 15% to 100%.\u003cbr\u003e\n\u003cb\u003eFlashing Green:\u003c\/b\u003e Battery power level is 5% to 15%, recommend charging.\u003cbr\u003e\n\u003cb\u003eSolid Red:\u003c\/b\u003e Battery power level is below 5%. Do not ride and charge immediately.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Approximately 42 volts are required to charge a 36 volt battery system. Some chargers for a 36 volt system may be marked or designated as 42 volt. Whether your old charger is marked as a 36 volt or as a 42 volt this is the correct replacement charger.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336785916066,"sku":"C04-1210","price":19.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc01585_-_mockup_1_3375532_1.jpg?v=1774749054"},{"product_id":"24vo8ampagxl-c04-1237","title":"24 Volt 8.0 Amp XLR 24BC8000T-4 Battery Charger","description":"\u003cp\u003eThis 24 volt 8 amp XLR 24BC8000T-4 battery charger is no lightweight plastic contraption. This charger for Gel and Absorbed Glass Mat (AGM) batteries is made by Universal Power Group (UPG), a very respected manufacturer of top-quality batteries and chargers for the medical and mobility industry. So trusted is this charger that Invacare offers it as original equipment on a number of their power chair models.\u003cbr\u003e\u003cbr\u003eThe 24 volt 8.0 amp XLR connector battery charger from UPG is suitable for the 17 Ah batteries or larger that are used on mobility scooters and power chairs equipped with an off-board charging female XLR socket. They use a convenient automatic shut off when the charging cycle is complete. Note that your charging time may vary depending on how depleted or drained down your battery is.\u003cbr\u003e\u003cbr\u003eThis battery charger features an automatic shut off when battery charging is complete. In addition, the selector switch must be set to Gel or AGM depending on the battery type to be charged.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - Displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 9 volts of power.\u003cbr\u003e\u003cbr\u003eUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003eMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eVoltage: 24V\u003c\/div\u003e\n\u003cdiv\u003eAmperage: 8.0A\u003c\/div\u003e\n\u003cdiv\u003eConnector: XLR\u003c\/div\u003e\n\u003cdiv\u003eApplication: Sealed Lead Acid (SLA) AGM or Gel\u003c\/div\u003e\n\u003cdiv\u003eModel Number: 24BC8000T-4\u003c\/div\u003e\n\u003cdiv\u003eManufacturer: Universal Power Group\u003c\/div\u003e\n\u003cdiv\u003eERAC Certification: SAA-172134-EA\u003c\/div\u003e\n\u003cdiv\u003eETL Certified: EP5020506\u003c\/div\u003e\n\u003cdiv\u003eUL Certified: UL 1310 (E245476)\u003c\/div\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336786112674,"sku":"C04-1237","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1237_1.jpg?v=1774749122"},{"product_id":"hp-8204b-5-amp-offboard-xlr-battery-charger","title":"24 Volt 5.0 Amp XLR HP8204B Battery Charger","description":"\u003cb\u003eNote:\u003c\/b\u003e This charger is equipped with a dual voltage switch which allows the charger to switch between 115 and 230 VAC. When used in the United States, the switch should be in the 115V position.\u003cbr\u003e\u003cbr\u003eWhen you need a premium quality 24 volt 5.0 amp XLR battery charger for your mobility scooter or power chair, you might want to take a closer look at the High Power HP8204B (or HP-8204B as it is sometimes listed).  So trusted are these These High Power HP8204B chargers that they are used as the original equipment (OEM) battery chargers by many mobility scooter and power wheelchair manufacturers.\u003cbr\u003e\u003cbr\u003eThis charger is a direct replacement for Pride Mobility's EA1065 model battery charger. It features a 115-volt input, 5.0 amp output, and an automatic shutoff when battery is charged. It also includes a 10 amp GMA fuse and an IEC power cord.\u003cbr\u003e\u003cbr\u003eUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003e\n\u003cfont color=\"red\"\u003eRed\u003c\/font\u003e - Power On\u003c\/li\u003e\u003cli\u003e\n\u003cfont color=\"orange\"\u003eYellow\u003c\/font\u003e - Charging\u003c\/li\u003e\u003cli\u003e\n\u003cfont color=\"green\"\u003eGreen\u003c\/font\u003e - Full Charge\u003c\/li\u003e\u003cli\u003eOff - Disconnect\u003c\/li\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP8204B","brand":"High Power","offers":[{"title":"Default Title","offer_id":44336787816610,"sku":"C13-418","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/hp-8204b-5-amp-offboard-xlr-battery-charger_3.jpg?v=1774750283"},{"product_id":"36v2bach","title":"36 Volt 1.6 Amp 2-Prong Battery Charger (Standard)","description":"\u003cp\u003eIf you are trying to find a replacement 36 Volt 1.6 Amp 2-Prong battery charger for your electric scooter, we are your very best source.\u003cbr\u003e\u003cbr\u003eThe 36 volt 2-prong is relatively rare as far as electric chargers go, and it is most commonly found on scooters made by Rad2Go, Sola, and X-Treme. Please refer to the Compatibility and Specifications tabs as well as the image below for a better view of the connector and its suitability on your scooter.\u003cbr\u003e\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336787849378,"sku":"C15-161","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c15-161_4.jpg?v=1774750291"},{"product_id":"12voltcharger2","title":"12 Volt 1.5 Amp Maintainer Battery Trickle Charger for Scooters, ATVs, \u0026 Dirt Bikes","description":"Use this 12 volt 1.5 amp output battery trickle charger maintainer to charge and maintain sealed lead-acid batteries in scooters, ATVs, dirt bikes, motorcycles, personal watercraft (PWC), automobiles, and boats. \u003cbr\u003e\n\u003cbr\u003e\nCompare this affordable power sports trickle charger to Battery Tender® \u0026amp; Battery Minder® brand chargers and save some cash while properly maintaining your battery. This is a great scooter accessory charger for use during cold winter months where you may not be riding on a daily or even weekly basis.\u003cbr\u003e\n\u003cbr\u003e\nThis charger comes with a quick disconnect connector for ease of charging your battery that may be difficult to access. Secure the wiring harness with ring connectors to your battery terminals, route the wiring harness just outside the battery compartment, and you can quick connect this trickle charger to keep your scooter, ATV, dirt bike, or go kart battery charged and ready to roll.\u003cbr\u003e\n\u003cbr\u003e\n\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed:\u003c\/i\u003e Constant Current Charge (Fast Charge)\u003cbr\u003e\n\u003ci\u003eOrange:\u003c\/i\u003e Constant Voltage Charge\u003cbr\u003e\n\u003ci\u003eGreen:\u003c\/i\u003e Battery Fully Chaged (Float\/Maintaining Stage)\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eThree Stage Charge Cycle\u003c\/b\u003e\u003cbr\u003e\n\nAn integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states:\u003cbr\u003e\n1. A high current, fast charge state: battery charges at 4,000 mA fast current rate until battery voltage reaches 14.6 volts.\u003cbr\u003e\n2. A topping charge state: battery charges at 14.6 volts constant voltage and current begins to taper until current is less than 1000 mA.\u003cbr\u003e\n3. A precision float charge state: the charger changes to the float state and holds the battery voltage at 13.6 volts continuous. This allows the charger to remain connected to the batteries during periods of non-use, keeping the batteries in a state of full charge.\u003cbr\u003e\n4. Return to bulk charge: should the battery voltage drop to 13 volts, the charger will return to the bulk charge state.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCharging a Battery\u003c\/b\u003e\u003cbr\u003e\nFollow these steps to charge a battery:\u003cbr\u003e\n1. Select the appropriate battery connector and connect it to the charger output connector.\u003cbr\u003e\n2. Connect the DC battery connector to the battery terminal (Red to \"+\", Black to \"-\").\u003cbr\u003e\n3. Plug the charger power cord into the charger.\u003cbr\u003e\n4. Plug the power cord into wall outlet. If no LED is on, then check the AC input connection.\u003cbr\u003e\n5. The LED light should be Red, indicating that the charger is charging the battery.\u003cbr\u003e\n6. When battery is fully charged, the LED will be Green. Unplug the charger from the wall, then disconnect from the battery.\u003cbr\u003e\n7. When charging a large battery, it may take a while for the green LED light to show or turn on.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSafety Features\u003c\/b\u003e\u003cbr\u003e\n1. Short-Circuit Protection - protects the charger from short-circuit damage.\u003cbr\u003e\n2. Over Current Protection - protects the charger from over-current demand.\u003cbr\u003e\n3. Over Voltage Protection - protects the batteries from damage.\u003cbr\u003e\n4. Battery Polarity Reversal - protects the charger and batteries against incorrectly installed batteries.\u003cbr\u003e\n5. Low Battery Voltage - When the battery is under 8V, the charger will not operate.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336787947682,"sku":"C16-115","price":16.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c16-115_1.jpg?v=1774750305"},{"product_id":"12-volt-4-0-amp-maintainer-4000-battery-trickle-charger-for-scooters-atvs-dirt-bikes","title":"12 Volt 4.0 Amp Maintainer 4000 Battery Trickle Charger for Scooters, ATVs, \u0026 Dirt Bikes","description":"A more powerful version of the Adventure Power 12 volt 2.0 amp output charger, this 4.0 amp battery trickle charger maintainer will charge and maintain sealed lead-acid batteries in scooters, ATVs, dirt bikes, motorcycles, personal watercraft (PWC), automobiles, and boats. Keep your ride ready to roll with this Adventure Power charger made by Universal Power Group (UPG).\u003cbr\u003e\n\u003cbr\u003e\nCompare this affordable power sports battery maintainer to Battery Tender®, Battery Minder®, and Energizer brand chargers and save some cash while properly maintaining your battery.\u003cbr\u003e\n\u003cbr\u003e\nThis is a great scooter accessory part for use during cold winter months where you may not be riding on a daily or even weekly basis.\u003cbr\u003e\n\u003cbr\u003e\nThis 4.0A output charger comes with a quick disconnect connector for ease of charging your battery that may be difficult to access. Secure the wiring harness with ring connectors to your battery terminals, route the wiring harness just outside the battery compartment, and you can quick connect this trickle charger to keep your scooter, ATV, dirt bike, or go kart battery charged and ready to roll.\u003cbr\u003e\n\u003cbr\u003e\n\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eRed:\u003c\/i\u003e Constant Current Charge (Fast Charge)\u003cbr\u003e\n\u003ci\u003eOrange:\u003c\/i\u003e Constant Voltage Charge\u003cbr\u003e\n\u003ci\u003eGreen:\u003c\/i\u003e Battery Fully Chaged (Float\/Maintaining Stage)\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eThree Stage Charge Cycle\u003c\/b\u003e\u003cbr\u003e\n\nAn integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states:\u003cbr\u003e\n1. A high current, fast charge state: battery charges at 4,000 mA fast current rate until battery voltage reaches 14.6 volts.\u003cbr\u003e\n2. A topping charge state: battery charges at 14.6 volts constant voltage and current begins to taper until current is less than 1000 mA.\u003cbr\u003e\n3. A precision float charge state: the charger changes to the float state and holds the battery voltage at 13.6 volts continuous. This allows the charger to remain connected to the batteries during periods of non-use, keeping the batteries in a state of full charge.\u003cbr\u003e\n4. Return to bulk charge: should the battery voltage drop to 13 volts, the charger will return to the bulk charge state.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eCharging a Battery\u003c\/b\u003e\u003cbr\u003e\nFollow these steps to charge a battery:\u003cbr\u003e\n1. Select the appropriate battery connector and connect it to the charger output connector.\u003cbr\u003e\n2. Connect the DC battery connector to the battery terminal (Red to \"+\", Black to \"-\").\u003cbr\u003e\n3. Plug the charger power cord into the charger.\u003cbr\u003e\n4. Plug the power cord into wall outlet. If no LED is on, then check the AC input connection.\u003cbr\u003e\n5. The LED light should be Red, indicating that the charger is charging the battery.\u003cbr\u003e\n6. When battery is fully charged, the LED will be Green. Unplug the charger from the wall, then disconnect from the battery.\u003cbr\u003e\n7. When charging a large battery, it may take a while for the green LED light to show or turn on.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eSafety Features\u003c\/b\u003e\u003cbr\u003e\n1. Short-Circuit Protection - protects the charger from short-circuit damage.\u003cbr\u003e\n2. Over Current Protection - protects the charger from over-current demand.\u003cbr\u003e\n3. Over Voltage Protection - protects the batteries from damage.\u003cbr\u003e\n4. Battery Polarity Reversal - protects the charger and batteries against incorrectly installed batteries.\u003cbr\u003e\n5. Low Battery Voltage - When the battery is under 8V, the charger will not operate.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eAdventure Power\u003c\/b\u003e: 84038","brand":"Adventure Power","offers":[{"title":"Default Title","offer_id":44336787980450,"sku":"C16-130","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c16-130_1.jpg?v=1774750312"},{"product_id":"12-volt-direct-connect-charge-n-star-battery-charger-jump-starter","title":"Adventure Power All-in-One 84039 Automobile Battery Charger, Jump Starter, \u0026 Air Compressor","description":"Convenience takes on a whole new meaning with the efficient, reliable and user-friendly 12 volt 18 amp Adventure Power All-in-One 84039 battery charger, jump starter, air compressor, and power inverter. Powered by an internal 12-volt, 18 Ah sealed lead-acid battery capable of delivering 350 Cold Cranking Amps (CCA) to your automobile battery, it is designed to quickly and safely deliver automotive power on three fronts: battery jump-starting power, an air pump for tire inflation, and untethered AC and DC current suitable for most any appliance or gadget. Covering virtually any temporary power requirement, the Adventure Power All-in-One provides all the power needed for any getaway.\u003cbr\u003e\n\u003cbr\u003e\nThe Adventure Power All-in-One battery charger, jump starter and compressor from Universal Power Group (UPG) is one of the very finest and useful accessories available for your scooter. This 12 volt, 18 Ah direct connect battery charger will maintain the charge and health of your battery and will provide the needed jump power for a low-charged or winter-cold battery.\u003cbr\u003e\n\u003cbr\u003e\nThe easy to read Red, Yellow, and Green LEDs provide visual indication of the charging mode. The two-stage internal charger allows the charger to remain plugged in to a wall socket indefinitely, keeping the unit's internal battery fully charged at all times.\u003cbr\u003e\n\u003cbr\u003e\nIn addition to the standard battery charging and jumping functions, the All-in-One features a 250 PSI compressor air pump to keep your scooter's tires topped-off and rolling along at their pneumatic best. The name All-in-One says it all.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eAdventure Power\u003c\/b\u003e: 84039","brand":"Adventure Power","offers":[{"title":"Default Title","offer_id":44336872063138,"sku":"D43-5089","price":201.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/12-volt-direct-connect-charge-n-star-battery-charger-jump-starter_4.jpg?v=1774760403"},{"product_id":"xlr-off-board-battery-charging-port-with-cover-wires","title":"XLR Off-Board Battery Charging Port with Cover \u0026 Wires","description":"Just what every electric scooter eventually needs. This is the standard XLR off-board battery charging socket found on untold millions of scooters.\u003cbr\u003e\u003cbr\u003e\nThe female socket (aka charging port) accepts the 3-pin male XLR charger connector for a tight and secure fit while your batteries get their \"go-juice\" topped off.\u003cbr\u003e\u003cbr\u003e\nOur cover includes the attached wires, so installation is a snap. The two wires are bare (without connectors) so you can solder or swage or crimp them to a multiplicity of connector types. They may be cut and spliced as required.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337019420834,"sku":"F79-8626","price":8.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/f79-8626_1_2.jpg?v=1774792533"},{"product_id":"xlrchco","title":"XLR Charger Connector - Male, 3 Pins","description":"Replacement male XLR connector with three pins for your battery charger. Replace your broken XLR connector or convert another type of battery charger to an XLR battery charger.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e You will have to attach your own wiring so please refer to the polarity graphic below. In addition, it may be helpful to label the wires prior to disassembly.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337019584674,"sku":"F79-8627","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/f79-8627_1.jpg?v=1774792578"},{"product_id":"xlrtomo3ad","title":"XLR-3 to Modified 3-Pin Adapter","description":"\u003cp\u003eOur XLR-3 to Modified 3-Pin adapter has two connector end. One is an XLR type, the other is a 3-Pin connector. This is a 10A 250V adapter.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eCurrie Technologies\u003c\/b\u003e: AU-2406-1","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337020305570,"sku":"F79-8640","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/xlrtomo3ad.jpg?v=1774792213"},{"product_id":"xlr-connector-off-board-charging-port-adapter","title":"XLR Connector Off Board Charging Port Adapter","description":"Off board charging port adapter from Currie Technologies.  The charging port connects to any XLR connector battery charger and allows you to charge your 24V or 36V battery pack while off your scooter.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eeZip 1000 Owners:\u003c\/b\u003e Please note that this is a 3-prong XLR charging port. Some newer versions of the eZip 1000 scooter require a 4-prong XLR connector. Please check your connectors before placing your order.\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eCurrie Technologies\u003c\/b\u003e: BA-075","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337020502178,"sku":"F79-8642","price":8.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/xlrcooffboch.jpg?v=1774792231"},{"product_id":"xlr4-to-3-pin-charger-adapter","title":"XLR-4 to 3-Pin Electric Bike Battery Charger Adapter","description":"\u003cp\u003eFor some electric bike owners, the XLR-4 to 3-pin electric bike battery charger adapter is a must-have item. If your e-bike's charging port is a newer female XLR-4, this handy adapter allows you to use a 3-pin shrouded connector charger. Please look carefully at the photo above before ordering.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eCurrie Technologies\u003c\/b\u003e: BA-075-002","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337024565410,"sku":"F79-8742","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/xlr4-to-3-pin-charger-adapter.jpg?v=1774792761"},{"product_id":"coda36v1mo3b","title":"36 Volt 1.5 Amp XLR Battery Charger with Modified 3-Pin Connector","description":"Hear is an excellent deal; our premium 36 Volt 1.5 amp XLR battery charger with a modified 3-pin connector. This premium charger\/connector combination package is a direct replacement for discontinued 36 volt Mongoose and IZIP electric bicycles with a modified 3-pin connector.\u003cbr\u003e\u003cbr\u003eWe paired our premium AlveyTech 36 volt XLR type electric scooter and electric bicycle battery charger with a modified 3-pin shroud female connector. Save money with this great combo deal from Monster Scooter Parts, and keep your IZIP or Mongoose buzzing along.\u003cbr\u003e\u003cbr\u003eMulti-color LED indicates battery charge level.\u003cbr\u003e\u003cbr\u003eUnderwriters Laboratories (UL®) Listed. Dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED Indicators:\u003c\/b\u003e\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Stand by\u003cbr\u003e\n\u003ci\u003eRed\u003c\/i\u003e - Charging\u003cbr\u003e\n\u003ci\u003eGreen\u003c\/i\u003e - Charged\u003cbr\u003e\n\u003cbr\u003e","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44337086038178,"sku":"H84-9129","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/h84-9129_2.jpg?v=1774809506"},{"product_id":"24","title":"24 Volt 2.0 Amp 3-Pin Battery Charger (Standard)","description":"The 24 volt 2.0 amp electric scooter and electric bicycle battery charger uses a 3-pin shroud female (IEC 320 C13) connector. The 3-pin connector is the same type of connector that is commonly used for computer power cables. If your electric scooter or e-bike uses this style of charging port, then this is an excellent battery charger at a very economical price.\u003cbr\u003e\n\u003cbr\u003e\nThis charger uses a multi-color LED to indicate the battery's charge level.  It is rated for dry location use only.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337087840418,"sku":"I59-6603","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6603--1.jpg?v=1774809918"},{"product_id":"to36vo20amp3","title":"36 Volt 2.5 Amp 3-Pin Battery Charger (Standard)","description":"If you need a 36 volt electric scooter and electric bicycle battery charger with 3-pin shroud female (IEC 320 C13) connector, we can bring you just what you require. This style connector is the same type that is commonly used for computer power cables.\u003cbr\u003e\n\u003cbr\u003e\nThe output specifications match or exceed factory supplied original equipment manufacturer's (OEM) specifications.  The multiple LED lights indicate your battery's charge status, and the automatic shut off indicates when charging is complete.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337088266402,"sku":"I59-6608","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6608_1_2.jpg?v=1774809952"},{"product_id":"36-volt-1-6-amp-3-pin-battery-charger-standard","title":"36 Volt 1.8 Amp 3-Pin Battery Charger (Standard)","description":"Do you need a replacement 36 volt battery charger for your electric scooter? Keep your scooter up and running with our standard 36 Volt 1.8 amp 3-pin IEC 320 C13 battery charger, a great choice for an affordable scooter part.\u003cbr\u003e\n\u003cbr\u003e\nThe HBC-03 36 volt scooter charger is compatible with a variety of electric scooter models. It is equipped with a 3-pin shroud female (IEC 320 C13) connector, and this 36 volt scooter charger is an electric scooter part you just can't do without.\u003cbr\u003e\n\u003cbr\u003e\nPlease see our compatibility page for a complete list of compatible scooter models that use a 3-prong battery charger.","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337088331938,"sku":"I59-6609","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6609_1.jpg?v=1774809971"},{"product_id":"24-volt-2-0-amp-coaxial-lithium-iron-lifepo4-battery-charger-for-electric-bikes","title":"24 Volt 2.0 Amp Coaxial Lithium-iron (LiFePO4) Battery Charger for Electric Bikes","description":"If you use a Lithium-iron battery system on your bike, you must use a battery charger designed for it. Our 24 Volt 2.0 Amp Coaxial Lithium-iron (LiFePO4) battery charger for electric bikes is made by Golden Motor, and is the perfect way to keep your high-tech LiFePO4 batteries fully charged.\u003cbr\u003e\n\u003cbr\u003e\nUnlike the more common sealed lead acid (SLA) batteries, LiFePO4 batteries MUST be charged with a dedicated LiFePO4 charger. Lithium-iron is extremely safe; unaffected by the over-heating and risk of fire or explosion that was a concern with the earlier Lithium-ion batteries.\u003cbr\u003e\n\u003cbr\u003e\nGolden Motor Technology can be said to know a thing or two about e-bikes. Their Magic Pie and Smart Pie open voltage hub motors are what their competition is measured by. This is the battery charger that was designed especially to use with their \u003ca href=\"24v-20ah-li-fe-battery-pack-golden.html\"\u003e24 Volt 20 Ah Lithium Iron (LiFePO4) Electric Bike Battery Pack\u003c\/a\u003e.","brand":"Golden Motor","offers":[{"title":"Default Title","offer_id":44337088594082,"sku":"I59-6615","price":30.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6615_1.jpg?v=1774810893"},{"product_id":"48-volt-3-0-amp-coaxial-lithium-iron-lifepo4-battery-charger-for-electric-bikes","title":"48 Volt 3.0 Amp Coaxial Lithium-iron (LiFePO4) Battery Charger for Electric Bikes","description":"The electric bike is only as good as its battery system, and good batteries require a great charger. If you use a Lithium-iron system, then you can't do better than our 48 volt 3.0 amp coaxial Lithium-iron (LiFePO4) battery charger from Golden Motor.\u003cbr\u003e\n\u003cbr\u003e\nUnlike the more common sealed lead acid (SLA) batteries, LiFePO4 batteries MUST be charged with a dedicated LiFePO4 charger. Lithium-iron is extremely safe; unaffected by the over-heating and risk of fire or explosion that was a concern with the earlier Lithium-ion batteries.\u003cbr\u003e\n\u003cbr\u003e\nGolden Motor Technology can be said to know a thing or two about e-bikes. Their Magic Pie and Smart Pie open voltage hub motors are what their competition is measured by. This is the battery charger that was designed especially to use with their \u003ca href=\"48v-10ah-li-fe-battery-pack-golden.html\"\u003e48 volt 10 Ah Lithium Iron (LiFePO4) Electric Bike Battery Pack\u003c\/a\u003e.","brand":"Golden Motor","offers":[{"title":"Default Title","offer_id":44337088659618,"sku":"I59-6617","price":101.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/48v-3amp-coaxial-lifepo4-electric-bike-charger-golden-motor_1.jpg?v=1774810911"},{"product_id":"48-volt-2-0-amp-3-pin-battery-charger-premium","title":"48 Volt 2.0 Amp 3-Pin Battery Charger (Premium)","description":"Our premium quality 48 volt 2.0 amp 3-pin quick-charge battery charger is made by AlveyTech, and is one of the very best battery chargers that has been our pleasure to offer our customers. Unlike the cheap and feckless battery chargers that are often supplied by the scooter brands, the AlveyTech battery charger is a robust and dependable necessity that you can count on.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This battery charger is made to be used with Absorbed Glass Mat (AGM) or gel lead batteries only. It is not compatible with Lithium-ion batteries.\n\u003cbr\u003e\u003cbr\u003e\nMany people prefer this older inline style charger that uses a pair of cords; one from the wall outlet to the charger, and one from the charger to the scooter. This allows better flexibility around the workbench without a big plastic charger case taking up the entire electrical receptacle. In addition, the 2.0 amp quick-charge results in a faster recharging cycle.\n\u003cbr\u003e\u003cbr\u003e\nThis is a premium quality battery charger that is Underwriters Laboratories (UL) listed with an automatic shut-off feature.","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44337088725154,"sku":"I59-6647","price":48.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6647_3.jpg?v=1774810913"},{"product_id":"36-volt-3-0-amp-3-pin-battery-charger-premium","title":"36 Volt 2.9 Amp 3-Pin Quick-Charge Battery Charger (Premium)","description":"Our premium quality 36 volt 2.9 amp 3-pin quick-charge battery charger is made by AlveyTech, and is one of the very best battery chargers that has been our pleasure to offer our customers. Unlike the cheap and feckless battery chargers that are often supplied by the scooter brands, the AlveyTech battery charger is a robust and dependable necessity that you can count on.\n\u003cbr\u003e\u003cbr\u003e\nMany people prefer this older inline style charger that uses a pair of cords; one from the wall outlet to the charger, and one from the charger to the scooter. This allows better flexibility around the workbench without a big plastic charger case taking up the entire electrical receptacle. In addition, the 2.9 amp quick-charge results in a faster recharging cycle.\n\u003cbr\u003e\u003cbr\u003e\nThis is a premium quality battery charger that is Underwriters Laboratories (UL) listed with an automatic shut-off feature.","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44337088823458,"sku":"I59-6636","price":42.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6636_1.jpg?v=1774810931"},{"product_id":"48-volt-3-0-amp-3-pin-battery-charger-premium","title":"48 Volt 3.0 Amp 3-Pin Quick-Charge Battery Charger for AGM \u0026 Gel Batteries (Premium)","description":"We are happy to offer our customers this exceptional premium-quality 48 volt 3.0 amp quick-charge 3-pin battery charger for Absorbed Glass Mat (AGM) and gel batteries. Unlike cheaper and undependable battery chargers that are often supplied by the scooter brands as accessories, the 48 volt 3.0 amp AlveyTech battery charger is a robust and dependable necessity that you can count on.\n\u003cbr\u003e\u003cbr\u003e\nMany people prefer this older inline style charger that uses a pair of cords; one from the wall outlet to the charger, and one from the charger to the scooter. This allows better flexibility around the workbench without a big plastic charger case taking up the entire electrical receptacle. In addition, the 3.0 amp quick-charge results in a faster recharging cycle.\n\u003cbr\u003e\u003cbr\u003e\nThis is a premium quality battery charger that is Underwriters Laboratories (UL) listed with an automatic shut-off feature.","brand":"AlveyTech","offers":[{"title":"Default Title","offer_id":44337088856226,"sku":"I59-6648","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/i59-6648_1_1.jpg?v=1774810939"},{"product_id":"off-board-charger-xlr-merits-s331","title":"24 Volt 6.0 Amp XLR HP8204B Battery Charger (39937072)","description":"Our 24 volt 6.0 amp XLR is a top-quality battery charger made by High Power, a brand of top-notch battery chargers known globally for the value of their products. This quick-charge charger is compatible with many mobility scooters and power wheelchairs that require off-board chargers with XLR connectors.\u003cbr\u003e\u003cbr\u003eThese are no cheap lightweights! The 2-1\/2 lb. HP8204B features a 115 volt input, 6.0 amp output, and an automatic shutoff when the battery is fully charged and ready to go.\u003cbr\u003e\u003cbr\u003eThese battery chargers can be used used on most electric mobility scooters powered by sealed lead acid (SLA) scooter batteries with an 18 Ah capacity or greater.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\u003ci\u003eRed\u003c\/i\u003e - Power On\u003cbr\u003e\u003ci\u003eYellow\u003c\/i\u003e - Charging\u003cbr\u003e\u003ci\u003eGreen\u003c\/i\u003e - Full Charge\u003cbr\u003e\u003ci\u003eOff\u003c\/i\u003e - Disconnect\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eHigh Power\u003c\/b\u003e: HP8204B","brand":"High Power","offers":[{"title":"Default Title","offer_id":44337320231074,"sku":"M48-1145","price":218.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/off-board-charger-xlr-merits-s331_3.jpg?v=1774875124"},{"product_id":"xlr-on-board-battery-charger-adapter-pride","title":"XLR On-Board Battery Charger Adapter (Pride) (HARUSHD2371)","description":"\u003cp\u003eXLR on-board battery charger adapter by Pride Mobility. This is a female connector with 3 holes for use with a male 3-pin XLR battery charger. This adapter is commonly used on Pride Mobility scooters and power chairs.\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337461166242,"sku":"P49-5802","price":25.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/P49-5802-1.jpg?v=1775038860"},{"product_id":"24v-5a-xlr-charger-pride","title":"24 Volt 5.0 Amp XLR EA1148D 24BC5000T-4 AGM\/Gel Battery Charger for Jazzy 600 ES, Elite 14, Elite HD, \u0026 J6 Power Chairs (CPC)","description":"Our 24 volt 5.0 amp XLR EA1148D 24BC5000T-4 AGM\/Gel battery charger from Universal Power Group (UPG) is an excellent way to keep your Jazzy 600 ES, Elite 14, Elite HD, or J6 power chair fully charged up and ready to go. Unlike most battery chargers, this charger is suitable for use on both standard AGM and Gel cell batteries. A convenient switch on the charger allows you to shift from one to the other. In addition to the Jazzy models mentioned, this handy battery charger may be used on a huge variety of power chair and mobility scooter brands and models. \u003cbr\u003e\n\u003cbr\u003e\nThe 24 volt 5.0 amp XLR connector battery charger from UPG is suitable for the 17 Ah batteries or larger that are used on mobility scooters and power chairs equipped with an off-board charging female XLR socket. They use a convenient automatic shut off when the charging cycle is complete. Note that your charging time may vary depending on how depleted or drained down your battery is.\u003cbr\u003e\n\u003cbr\u003e\nFully compatible as a replacement for model HP8204B battery charger. Automatic shut off when battery charging is complete. Charging time varies greatly with level of battery depletion.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e The selector switch must be set to GEL or AGM depending on the battery type to be charged.\u003cbr\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - 3 LED displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\nMonster Scooter Parts is proud to announce a full 1-year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\nPlease note that the instructions you receive with this battery charger may state \"suitable for lead acid batteries only.\" Do not be confused by this. AGM and GEL batteries are both forms of sealed \"lead acid\" batteries. Therefore, this battery charger is fully compatible with both AGM and GEL batteries, although it is optimized for use with AGM batteries.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 18 volts of power.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eReplaces Pride\u003c\/b\u003e: ELEASMB6293, ELECHG1025\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC5000T-4 (replaces 24BC5000TF-1)","brand":"Universal Power Group","offers":[{"title":"Default Title","offer_id":44337514348706,"sku":"P49-9070","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/c04-1175_4_8.jpg?v=1774577692"}],"url":"https:\/\/monstorscooterparts.shop\/collections\/specialty-parts-battery-chargers.oembed?page=3","provider":"Monster Scooter Parts","version":"1.0","type":"link"}