{"title":"Quantum Q1650 - Joystick (Master Controls) - Replacement Parts \u0026 Accessories - Templates - Remote Plus","description":null,"products":[{"product_id":"keypad-2-key-gc-joystick-jazzy-select","title":"Keypad for 2-Key GC Joystick Remote for Jazzy Select Power Chairs","description":"The keypad for 2-key GC2\/GC3 joystick controller is used on the Jazzy Select, Jazzy Sport Portable, and many other power chair models. Replacing a worn keypad is one of the simple repairs that anyone can perform on their chair.\u003cbr\u003e\n\u003cbr\u003e\nThis 2-key pad features the horn and the On\/Off buttons.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: DWR1111H199","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337488396450,"sku":"P49-8323","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8323_1.jpg?v=1774574922"},{"product_id":"keypad-vsi-joystick-controller","title":"Keypad for 4 Key VSI Joystick Controllers","description":"Replacement joystick keypad used with 4 key VSI joystick controllers made by PG Drives Technology. This is one of the most commonly used keypads on joysticks for a variety of power chair makes and models, including Jazzy and Jet power chairs made by Pride Mobility. It is also used with a variety of Hoveround© and Shoprider power chair models, among others.\u003cbr\u003e\n\u003cbr\u003e\nThis 4 key VSI joystick keypad includes the following keys:\u003cbr\u003e\n\n\n\u003cli\u003eBattery condition meter\u003c\/li\u003e\n\u003cli\u003eOn\/off key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cli\u003eHorn key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eMaximum speed\/profile indicator\u003c\/li\u003e\n\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: P75736\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: P75736\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1071","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337636049058,"sku":"S73-8062","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8062_1.jpg?v=1774591079"},{"product_id":"6-key-keypad-vsi-joystick-controller","title":"Keypad for 6 Key VSI Joystick Controller (RECPART1061)","description":"Joystick keypad template to be used with 6 key VSI joystick controllers made by PG Drives Technology on Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nVSI Joystick template includes the following keys:\u003cbr\u003e\n\u003cli\u003eBattery condition meter\u003c\/li\u003e\n\u003cli\u003eOn\/off key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cli\u003eHorn key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eMaximum speed\/profile indicator\u003c\/li\u003e\n\u003cbr\u003e\nFor features used on some models two actuator lights and two actuator keys are also included on this template.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1061","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637228706,"sku":"S73-8087","price":156.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/6-key-keypad-vsi-joystick-controller_2.jpg?v=1774591262"},{"product_id":"6-key-keypad-vsi-joystick-controller-lighting","title":"Keypad for 6 Key VSI Joystick Controller with Lighting (RECPART1066)","description":"Joystick keypad template to be used with 6 key VSI joystick controllers with lighting made by PG Drives Technology on Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nPG Drives Technologies has made this joystick not only ergonomic and stylish but cost effective. This keypad has been designed to be field replaceable.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1066","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637261474,"sku":"S73-8088","price":73.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/6-key-keypad-vsi-joystick-controller-lighting_1.jpg?v=1774591101"},{"product_id":"keypad-for-3-key-remote-plus-joystick-controller-with-single-profile","title":"Keypad for 3 Key Remote Plus Joystick Controller with Single Profile (TECSERV1064)","description":"Joystick keypad template to be used with the 3 Key Remote Plus joystick controller made by PG Drives Technology for power chair models manufactured by Pride Mobility.\u003cbr\u003e\n\u003cbr\u003e\nThis remote plus keypad includes the following:\u003cli\u003eBattery condition meter\u003c\/li\u003e\u003cli\u003eHorn key\u003c\/li\u003e\u003cli\u003eMode key\u003c\/li\u003e\u003cli\u003eOn\/off key\u003c\/li\u003e\u003cli\u003eSpeed setting indicator\u003c\/li\u003e\u003cbr\u003e\nFor optional power accessories a power accessory indicator is also included.\u003cbr\u003e\n\u003cbr\u003e\nPlease note that the \u003ca href=\"3-key-keypad-remote-plus-joystick-controllers-with-profiles.html\"\u003eKeypad for 3 Key Remote Plus Joystick Controller with Multiple Profiles\u003c\/a\u003e is functionally identical to this keypad and is a good alternative to this keypad. Both keypads provide the exact same functions. The only differences are the color of the keypads and the fact that the \"Multiple Profile\" keypad has \"Quantum\" printed on it. However, the two keypads can be used interchangeably.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePG Drives\u003c\/b\u003e: P73903\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: TECSERV1064","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637294242,"sku":"S73-8090","price":168.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/3-key-keypad-remote-plus-joystick-controller_1.jpg?v=1774591103"},{"product_id":"keypad-for-the-3-key-remote-plus-joystick-controller-with-multiple-profiles","title":"Keypad for the 3 Key Remote Plus Joystick Controller with Multiple Profiles (RECPART1085)","description":"Joystick keypad template to be used with the 3 Key Remote Plus with Multiple Profiles joystick controller made by PG Drives Technology for Quantum power chair models manufactured by Pride Mobility.\u003cbr\u003e\n\u003cbr\u003e\nThis remote plus keypad includes the following:\u003cli\u003eBattery condition meter\u003c\/li\u003e\u003cli\u003eHorn key\u003c\/li\u003e\u003cli\u003eMode key\u003c\/li\u003e\u003cli\u003eOn\/off key\u003c\/li\u003e\u003cli\u003eSpeed setting indicator\u003c\/li\u003e\u003cbr\u003e\nFor optional power accessories a power accessory indicator is also included.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1085","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637359778,"sku":"S73-8091","price":23.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8091_1.jpg?v=1774591106"},{"product_id":"keypad-for-3-key-vsi-joystick-controller-with-rear-lighting","title":"Keypad for 3 Key VSI Joystick Controller with Rear Lighting (RECPART1067)","description":"Joystick keypad template to be used with 3 key VSI joystick controllers equipped with rear lighting made by PG Drives Technology for Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nVSI joystick template include the following keys:\u003cbr\u003e\n\u003cli\u003eActuator key\u003c\/li\u003e\n\u003cli\u003eActuator lights\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1067","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637392546,"sku":"S73-8089","price":81.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/3-key-keypad-vsi-joystick-controller-rear-lighting_1.jpg?v=1774591108"},{"product_id":"reconditioned-4-key-keypad-vr2-joystick-controller","title":"Keypad for 4 Key VR2 Joystick Controller","description":"Do you need a replacement keypad for the 2- key VR2 joystick controller? If you do, then we have the peel \u0026amp; stick keypad that your joystick requires.\u003cbr\u003e\u003cbr\u003e\nThis keypad is one of our best selling parts for mobility power chairs. If you use your chair daily you already know that the keypad is an easily replaced item. If your old keypad is worn beyond hope, then don't buy another joystick, just pop a new keypad on it and get mobile again.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1129\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBZ00058\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: P77909\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: P77909","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637458082,"sku":"S73-8094","price":24.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8094_1.jpg?v=1774591112"},{"product_id":"keypad-for-6-key-vr2-joystick-controller","title":"Keypad for 6 Key VR2 Joystick Controller (RECPART1130)","description":"Keypad for 6 key VR2 joystick controllers with seat lift function.\u003cbr\u003e\n\u003cbr\u003e\nVR2 joystick template includes the following keys:\u003cbr\u003e\n\u003cli\u003eDual actuator keys\u003c\/li\u003e\u003cli\u003eDual actuator lights\u003c\/li\u003e\u003cli\u003eHorn key\u003c\/li\u003e\u003cli\u003eOn\/off key\u003c\/li\u003e\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1130","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637556386,"sku":"S73-8095","price":169.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8095_1.jpg?v=1774591138"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/collections\/5867.gif?v=1727297834","url":"https:\/\/monstorscooterparts.shop\/collections\/quantum-q1650-joystick-master-controls-replacement-parts-accessories-templates-remote-plus.oembed","provider":"Monster Scooter Parts","version":"1.0","type":"link"}