{"title":"PG Drives Joystick Controller Keypads","description":null,"products":[{"product_id":"dual-attendant-keypad-3-button-for-vr2-joystick-modules","title":"Dual Attendant Keypad (3 Button) for VR2 Joystick Modules (P76464)","description":"Here is the replacement dual attendant keypad (3 Button) for VR2 joystick modules made by PG Drives Technology. Monster Scooter Parts is your source for genuine PG Drives joystick modules, controllers, and parts.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: P76464","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44336968695970,"sku":"E41-9890","price":61.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dual-attendant-keypad-vr2_1.jpg?v=1774785258"},{"product_id":"keypad-2-key-gc-joystick-jazzy-select","title":"Keypad for 2-Key GC Joystick Remote for Jazzy Select Power Chairs","description":"The keypad for 2-key GC2\/GC3 joystick controller is used on the Jazzy Select, Jazzy Sport Portable, and many other power chair models. Replacing a worn keypad is one of the simple repairs that anyone can perform on their chair.\u003cbr\u003e\n\u003cbr\u003e\nThis 2-key pad features the horn and the On\/Off buttons.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: DWR1111H199","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337488396450,"sku":"P49-8323","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8323_1.jpg?v=1774574922"},{"product_id":"keypad-5-key-dynamic-shark","title":"Keypad with Actuator Buttons for the 5 Key Dynamic Shark DK-REMD11 and MK5 SPJ+ Joystick","description":"\u003cp\u003eReplacement keypad for the 5 key Dynamic Shark DK-REMD11 joystick remote. The 5-key Dynamic Shark is used on the Jazzy 614 and several PaceSaver power chair models. This part is sometimes referred to as a joystick overlay.\u003cbr\u003e\u003cbr\u003eAlso used on the Invacare MK5 SPJ+ \"with accessories\" joysticks.\u003cbr\u003e\u003cbr\u003ePlease check the Compatibility tab for a listing of known compatible models.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e1. Ensure the wheelchair power is turned off.\u003cbr\u003e2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e10. Remove the backing from the new keypad.\u003cbr\u003e11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e15. Connect the joystick cable to the joystick.\u003cbr\u003e16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare:\u003c\/b\u003e 1165093\u003cbr\u003e\u003cstrong\u003eGolden Technologies:\u003c\/strong\u003e MBC-GLA80842\u003cbr\u003e\u003cb\u003ePaceSaver\u003c\/b\u003e: 82675\u003cbr\u003e\u003cb\u003ePride Mobility\u003c\/b\u003e: PLSINDV1265\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337514774690,"sku":"P49-9088","price":61.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/keypad-5-key-dynamic-shark_1.jpg?v=1774578174"},{"product_id":"keypad-vsi-joystick-controller","title":"Keypad for 4 Key VSI Joystick Controllers","description":"Replacement joystick keypad used with 4 key VSI joystick controllers made by PG Drives Technology. This is one of the most commonly used keypads on joysticks for a variety of power chair makes and models, including Jazzy and Jet power chairs made by Pride Mobility. It is also used with a variety of Hoveround© and Shoprider power chair models, among others.\u003cbr\u003e\n\u003cbr\u003e\nThis 4 key VSI joystick keypad includes the following keys:\u003cbr\u003e\n\n\n\u003cli\u003eBattery condition meter\u003c\/li\u003e\n\u003cli\u003eOn\/off key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cli\u003eHorn key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eMaximum speed\/profile indicator\u003c\/li\u003e\n\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: P75736\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: P75736\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1071","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337636049058,"sku":"S73-8062","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8062_1.jpg?v=1774591079"},{"product_id":"6-key-keypad-vsi-joystick-controller","title":"Keypad for 6 Key VSI Joystick Controller (RECPART1061)","description":"Joystick keypad template to be used with 6 key VSI joystick controllers made by PG Drives Technology on Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nVSI Joystick template includes the following keys:\u003cbr\u003e\n\u003cli\u003eBattery condition meter\u003c\/li\u003e\n\u003cli\u003eOn\/off key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cli\u003eHorn key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eMaximum speed\/profile indicator\u003c\/li\u003e\n\u003cbr\u003e\nFor features used on some models two actuator lights and two actuator keys are also included on this template.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1061","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637228706,"sku":"S73-8087","price":156.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/6-key-keypad-vsi-joystick-controller_2.jpg?v=1774591262"},{"product_id":"keypad-for-the-3-key-remote-plus-joystick-controller-with-multiple-profiles","title":"Keypad for the 3 Key Remote Plus Joystick Controller with Multiple Profiles (RECPART1085)","description":"Joystick keypad template to be used with the 3 Key Remote Plus with Multiple Profiles joystick controller made by PG Drives Technology for Quantum power chair models manufactured by Pride Mobility.\u003cbr\u003e\n\u003cbr\u003e\nThis remote plus keypad includes the following:\u003cli\u003eBattery condition meter\u003c\/li\u003e\u003cli\u003eHorn key\u003c\/li\u003e\u003cli\u003eMode key\u003c\/li\u003e\u003cli\u003eOn\/off key\u003c\/li\u003e\u003cli\u003eSpeed setting indicator\u003c\/li\u003e\u003cbr\u003e\nFor optional power accessories a power accessory indicator is also included.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1085","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637359778,"sku":"S73-8091","price":23.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8091_1.jpg?v=1774591106"},{"product_id":"keypad-for-3-key-vsi-joystick-controller-with-rear-lighting","title":"Keypad for 3 Key VSI Joystick Controller with Rear Lighting (RECPART1067)","description":"Joystick keypad template to be used with 3 key VSI joystick controllers equipped with rear lighting made by PG Drives Technology for Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nVSI joystick template include the following keys:\u003cbr\u003e\n\u003cli\u003eActuator key\u003c\/li\u003e\n\u003cli\u003eActuator lights\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\n\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1067","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637392546,"sku":"S73-8089","price":81.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/3-key-keypad-vsi-joystick-controller-rear-lighting_1.jpg?v=1774591108"},{"product_id":"7-key-keypad-remote-plus-joystick-controller","title":"7 Key Remote Plus Joystick Controller Keypad for Jazzy, Permobil, \u0026 Quantum Powerchairs (TECSERV1065)","description":"Joystick keypad template to be used with 7 key Remote Plus joystick controllers made by PG Drives Technology on Pride Mobility's Jazzy \u0026amp; Quantum powerchair models, as well as some models from Permobil.\u003cbr\u003e\n\u003cbr\u003e\nRemote Plus template includes the following keys:\u003cbr\u003e\n\u003cli\u003eBattery condition meter\u003c\/li\u003e\n\u003cli\u003eHorn key\u003c\/li\u003e\n\u003cli\u003eMode key\u003c\/li\u003e\n\u003cli\u003eOn\/off key\u003c\/li\u003e\n\u003cli\u003eSpeed setting indicator\u003c\/li\u003e\n\u003cbr\u003e\nFor optional power accessories the following keys are also included on the Remote Plus Joystick:\u003cbr\u003e\n\u003cli\u003eHazard key\u003c\/li\u003e\n\u003cli\u003eLeft turn indicator key\u003c\/li\u003e\n\u003cli\u003eLight key\u003c\/li\u003e\n\u003cli\u003ePower accessory indicator\u003c\/li\u003e\n\u003cli\u003eRight turn indicator key\u003c\/li\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePG Drives\u003c\/b\u003e: P73907\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: TECSERV1065","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637425314,"sku":"S73-8092","price":52.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/7-key-keypad-remote-plus-joystick-controller_1.jpg?v=1774591110"},{"product_id":"reconditioned-4-key-keypad-vr2-joystick-controller","title":"Keypad for 4 Key VR2 Joystick Controller","description":"Do you need a replacement keypad for the 2- key VR2 joystick controller? If you do, then we have the peel \u0026amp; stick keypad that your joystick requires.\u003cbr\u003e\u003cbr\u003e\nThis keypad is one of our best selling parts for mobility power chairs. If you use your chair daily you already know that the keypad is an easily replaced item. If your old keypad is worn beyond hope, then don't buy another joystick, just pop a new keypad on it and get mobile again.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1129\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBZ00058\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: P77909\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: P77909","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637458082,"sku":"S73-8094","price":24.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8094_1.jpg?v=1774591112"},{"product_id":"battery-indicator-keypad-for-pilot-joystick-controller","title":"Battery Indicator Keypad for Pilot Joystick Controller (DECINDV1204)","description":"Battery indicator keypad for Pilot joystick controllers on Pride Mobility scooter models.\u003cbr\u003e\n\u003cbr\u003e\nThe following are light patterns you might see on your battery indicator and what they mean.\u003cbr\u003e\n\u003cli\u003eRed, yellow, and green lights lit means batteries are fully charged and Pilot and electrical systems are ok.\u003c\/li\u003e\u003cbr\u003e\n\u003cli\u003eRed and yellow lights are lit means charge your batteries if possible. Pilot and electrical systems are ok.\u003c\/li\u003e\u003cbr\u003e\n\u003cli\u003eRed lights only or slow flashing lights means charge your batteries as soon as possible.  Pilot and electrical systems are ok.\u003c\/li\u003e\u003cbr\u003e\n\u003cli\u003eRapid flashing lights means that your joystick controller has detected a problem in the electrical system and the power chair drive operation is inhibited.  You should refer to your manual for fault codes.\u003c\/li\u003e\u003cbr\u003e\n\u003cli\u003eIf you are experiencing a ripple of lights up and down then your joystick was not in neutral when it was turned on.  You should then turn off your joystick, return it to the neutral position and turn it back on to reset it.\u003c\/li\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: DECINDV1204","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637523618,"sku":"S73-8093","price":9.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/battery-indicator-keypad-pilot-joystick-controller.jpg?v=1774591137"},{"product_id":"keypad-for-6-key-vr2-joystick-controller","title":"Keypad for 6 Key VR2 Joystick Controller (RECPART1130)","description":"Keypad for 6 key VR2 joystick controllers with seat lift function.\u003cbr\u003e\n\u003cbr\u003e\nVR2 joystick template includes the following keys:\u003cbr\u003e\n\u003cli\u003eDual actuator keys\u003c\/li\u003e\u003cli\u003eDual actuator lights\u003c\/li\u003e\u003cli\u003eHorn key\u003c\/li\u003e\u003cli\u003eOn\/off key\u003c\/li\u003e\u003cli\u003eSpeed\/profile decrease key\u003c\/li\u003e\u003cli\u003eSpeed\/profile increase key\u003c\/li\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: RECPART1130","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337637556386,"sku":"S73-8095","price":169.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8095_1.jpg?v=1774591138"},{"product_id":"keypad-newvsi","title":"Keypad for 4 Key newVSI Joystick Controllers (P79521)","description":"\u003cp\u003eWhen you need a replacement keypad for the 4-key newVSI joystick controller, aren't you glad that Monster Scooter Parts is here for you. The controller is the \"electronic brain\" of the scooter's operating system, and the keypad is its interface control. A worn keypad should be replaced with its new identical twin.\u003cbr\u003e\u003cbr\u003eThe newVSI joystick controller is used on several high-quality power chairs. Among the models for which this is compatible are the Merits P120 Travel-Ease Regal, the Shoprider Jimmie (UL8WPB\/UL8WPBS), and Shoprider XtraLite Jiffy (UL7WR). \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e1. Ensure the wheelchair power is turned off.\u003cbr\u003e2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e10. Remove the backing from the new keypad.\u003cbr\u003e11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e15. Connect the joystick cable to the joystick.\u003cbr\u003e16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePride Mobility\u003c\/b\u003e: P79521\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337648140450,"sku":"S73-8413","price":197.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8413_1.jpg?v=1774593569"}],"url":"https:\/\/monstorscooterparts.shop\/collections\/pg-drives-pg-drives-joystick-parts-pg-drives-joystick-keypads.oembed","provider":"Monster Scooter Parts","version":"1.0","type":"link"}