{"title":"Invacare Pronto M91 with SureStep Parts","description":"Invacare Pronto M91 with SureStep parts are essential for maintaining mobility and functionality. Locating the right parts for the Invacare Pronto M91 with SureStep can be simplified with precise serial number identification. The specific serial number format helps technicians and customers accurately match parts to their exact power chair model.\u003cbr\u003e\u003cbr\u003eFor batteries for the Invacare Pronto M91 with SureStep, the system requires (2) 12v 22NF batteries. Finding the correct battery replacements ensures optimal performance and reliability. Battery chargers for the Invacare Pronto M91 with SureStep are equally critical for maintaining power system integrity.\u003cbr\u003e\u003cbr\u003eWhen searching for parts for the Invacare Pronto M91 with SureStep, customers should first locate their serial number. This number is typically found on the frame, potentially requiring battery or shroud removal. The serial number format follows specific conventions: 02A12345 or 02BM123456, where the first two characters indicate manufacturing year and the third character represents the production month.\u003cbr\u003e\u003cbr\u003eReplacement components like Invacare Pronto M91 with SureStep joysticks, tires, and battery chargers require precise matching to ensure compatibility. Joysticks for the Invacare Pronto M91 with SureStep must be exact replacements to maintain control functionality. Similarly, tires for the Invacare Pronto M91 with SureStep need careful selection to guarantee proper fit and performance.\u003cbr\u003e\u003cbr\u003eIf specific Invacare Pronto M91 with SureStep parts are not immediately visible, customers are encouraged to contact customer service. Providing the complete serial number expedites the parts identification and procurement process.","products":[{"product_id":"24v-8a-agm-gel-xlr-charger","title":"24 Volt 8 Amp XLR AGM\/Gel Mobility Battery Charger","description":"When you require a truly superlative battery charger to keep your mobility scooter or power chair topped off and up to snuff, This 24 volt 8 amp XLR 24BC8000T-4 battery charger for both Gel and Absorbed Glass Mat (AGM) batteries. This highest-quality charger is made by UPG, and it is a world away from the typical lightweight plastic imported chargers offered by the scooter brands. So trusted is this charger that Invacare offers it as original equipment on a number of their power chair models.\u003cbr\u003e\u003cbr\u003e\nThe 24 volt 8.0 amp XLR connector battery charger from UPG is suitable for the 17 Ah batteries or larger that are used on mobility scooters and power chairs equipped with an off-board charging female XLR socket. They use a convenient automatic shut off when the charging cycle is complete. Note that your charging time may vary depending on how depleted or drained down your battery is.\u003cbr\u003e\n\u003cbr\u003e\nThis battery charger features an automatic shut off when battery charging is complete. In addition, the selector switch must be set to Gel or AGM depending on the battery type to be charged.\u003cbr\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eShort Circuit Protection - Prevents damage caused when operating in a short circuit condition for an indefinite period of time. The charger is \"self-recovering\" when the fault condition is removed.\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection - Prevents damage when positive and negative polarities are connected in reverse.\u003c\/li\u003e\n\u003cli\u003eFully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode, the charger maintains fully charged condition.\u003c\/li\u003e\n\u003cli\u003eDesigned to Prevent Over Charging - Automatically switches to Float Mode.\u003c\/li\u003e\n\u003cli\u003eComplete 3-Stage Process - Bulk Charge, Absorption, Maintenance\/Float.\u003c\/li\u003e\n\u003cli\u003eLow Voltage Protection - When the battery voltage is below a preset value, the charger will not start charging.\u003c\/li\u003e\n\u003cli\u003eLED Display - Displays indicate the charging status: power on, charging, charged.\u003c\/li\u003e\n\u003cli\u003eLightweight - Switch mode chargers are very much lighter than linear chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e As a built-in safety feature, the battery charger will not operate if the existing battery has less than 9 volts of power.\u003cbr\u003e\n\u003cbr\u003e\nUnderwriters Laboratories (UL) Listed. Dry location use only.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eUniversal Power Group (UPG)\u003c\/b\u003e: 24BC8000T-4","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336783229090,"sku":"C04-1153","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/C04-12371.jpg?v=1774748736"},{"product_id":"24v-8a-dual-voltage-xlr-charger","title":"24 Volt 8.0 Amp Dual Mode XLR Battery Charger (Lester)","description":"This great 24 volt, 8 amp dual mode XLR battery charger is an excellent battery charger for mobility scooters and power wheel chairs. The manufacturer is Lester Electrical and is their part number 18350.\u003cbr\u003e\u003cbr\u003e\"Dual mode\" refers to the fact that this charger is designed recharge either traditional Sealed Lead Acid (SLA) \"wet cell\" batteries, the more modern Absorbed Glass Mat (AGM), or the newer style gel batteries. Simply flip a switch on the charger to choose which type of battery you want to charge.\u003cbr\u003e\u003cbr\u003eThis battery charger monitors charger output and automatically shuts off when batteries are fully charged. \u003cbr\u003e\u003cbr\u003e\u003cli\u003eProven Lester Electrical reliability\u003c\/li\u003e\u003cli\u003eU.S. \u0026amp; International power cables\u003c\/li\u003e\u003cli\u003e8' cable\u003c\/li\u003e\u003cli\u003eSteel case with a compact footprint\u003c\/li\u003e\u003cli\u003eConvection cooled with no moving parts\u003c\/li\u003e\u003cli\u003eAdvanced microprocessor control\u003c\/li\u003e\u003cli\u003ePrecise charging and termination algorithms\u003c\/li\u003e\u003cli\u003eWet and Sealed charge profiles\u003c\/li\u003e\u003cli\u003eFront panel switch\u003c\/li\u003e\u003cli\u003eLED indicators\u003c\/li\u003e\u003cli\u003eCharger protection\u003c\/li\u003e\u003cli\u003eVoltage mismatch, reverse polarity, andshort circuit\u003c\/li\u003e\u003cli\u003eUL listed and CSA certified\u003c\/li\u003e\u003cli\u003eMade in the USA \u003c\/li\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003eMonster Scooter Parts is proud to announce a 2 year warranty on this battery charger, covering defects in material \u0026amp; workmanship for a period of 2 years (24 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLester Electrical\u003c\/b\u003e: 18350","brand":"Lester Electrical","offers":[{"title":"Default Title","offer_id":44336783458466,"sku":"C04-1152","price":333.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-8a-dual-voltage-xlr-charger_6_1.jpg?v=1774748757"},{"product_id":"24-volt-8-amp-portable-battery-charger-guest-marinco","title":"24 Volt 8.0 Amp XLR 28008 Portable Battery Charger","description":"Keep your scooter charged wherever you go with this portable 24 volt 8.0 amp XLR battery charger by Guest-Marinco.\u003cbr\u003e\u003cbr\u003eThis big charger comes with 3-pin XLR connector, a 4' cable, built-in electronic overload and thermal protection, and LED light indicators. Features include quiet operation, automatic short circuit protection, and reverse polarity protection.\u003cbr\u003e\u003cbr\u003eThe 28008 is compatible with most mobility chairs and power scooters with XLR connector ports.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003eMonster Scooter Parts is proud to announce a full 2 year warranty on this battery charger, covering defects in material and workmanship for a period of 2 year (24 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eGuest-Marinco\u003c\/b\u003e: 28008","brand":"Guest","offers":[{"title":"Default Title","offer_id":44336783589538,"sku":"C04-1159","price":329.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24-volt-8-amp-portable-battery-charger-guest-marinco_4.jpg?v=1774748785"},{"product_id":"24v-8a-xlr-charger-trupower","title":"24 Volt 8.0 Amp XLR EA1230B (A24080-10D) Battery Charger","description":"Our 24 Volt 8.0 Amp XLR battery charger is made by Battery Maximizer and is a very good choice for those who demand superior quality without breaking the budget. Battery Maximizer calls this charger their EA1230B (A24080-10D), and this 24 volt 8.0 amp XLR beauty offers its excellent performance on an wide variety of mobility scooters and power chair brands and models. Please see the extensive (though by no means definitive) list of mobility products that will accept from this battery charger's volt\/amp combination.\u003cbr\u003e\n\u003cbr\u003e\nThis powerful UL\/CUL CE listed charger uses the 3-pin XLR connector as well as a standard 110V AC plug which can be plugged into any standard household outlet. Battery Maximizer designed this powerful charger to properly recharge VRLA, SLA, AGM, and Gel lead-acid batteries without having to worry about overcharging.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eLED lights indicate battery charge level as follows:\u003c\/b\u003e\u003cbr\u003e\n\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Power On\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eRed\u003c\/i\u003e - Fast Charge\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - AC Connection\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Ready\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePower\u003c\/b\u003e - \u003ci\u003eGreen\u003c\/i\u003e - Error, Short Circuit, Leads Reversed\u003cbr\u003e\n\n\u003cb\u003eCharge\u003c\/b\u003e - \u003ci\u003eRed\u003c\/i\u003e - Battery Disconnected, Battery Under 5 Volts\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eWarranty Information\u003c\/b\u003e:\u003cbr\u003e\n\nMonster Scooter Parts is proud to announce a full 1 year warranty on this battery charger, covering defects in material and workmanship for a period of 1 year (12 months) from the date of receipt. Our full warranty policy can be viewed at the following link:\u003cbr\u003e\n\u003cbr\u003e\n\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/warrantypolicy.html\"\u003eMonster Scooter Parts Warranty Policy\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eBattery Maximizer Model:\u003c\/b\u003e EA1230B (A24080-10D)\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eBattery Maximizer\u003c\/b\u003e: EA1230B (A24080-10D)","brand":"Battery Maximizer","offers":[{"title":"Default Title","offer_id":44336785326242,"sku":"C04-1201","price":185.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/24v-8a-xlr-charger-trupower_4.jpg?v=1774749001"},{"product_id":"300-8-foam-filled-tire-knobby-invacare","title":"14\"x3\" (3.00-8) Foam Filled Mobility Tire (Flush Profile; 50 mm Bead Width) with C248 PowertraxTread (TAG114291)","description":"Monster Scooter Parts is pleased to bring you the ever-popular 3.00-8 (14\"x3\") foam-filled mobility tire with non-marking gray C248 Powertrax knobby tread by Primo. This foam-filled mobility tire is compatible with many different Invacare and Permobil power chair models. The bead-to-bead measurement is approximately 50 mm and it has a flush profile.\u003cbr\u003e\n\u003cbr\u003e\n\u003ccenter\u003e\u003cimg src=\"https:\/\/www.monstorscooterparts.shop\/media\/images\/flush-c.jpg\"\u003e\u003c\/center\u003e\u003cbr\u003e\n\u003cbr\u003e\nPlease check the Compatibility tab for a full listing of known compatible models. If your model is not listed here, please be sure to check the profile and bead-to-bead measurement of your old tire to ensure compatibility.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336801448098,"sku":"D18-2597","price":84.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/d18-2597_1.jpg?v=1774752976"},{"product_id":"14x3-light-gray-solid-urethane-tire-knobby-tread-invacare","title":"14\"x3\" (3.00-8) Light Gray Solid Urethane Mobility Tire with Aero-flex™ Knobby Tread for Invacare Power Chairs","description":"14\"x3\"(3.00-8) light gray solid urethane mobility tire with Aero-flex™ knobby tread for Invacare power chairs. It has a 1-3\/4\" bead width.\u003cbr\u003e\n\u003cbr\u003e\nThis solid urethane mobility tire is compatible with several Invacare power chair models. Please check the Compatibility tab for a full listing of known compatible models.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336803020962,"sku":"D18-2623","price":107.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/14x3-light-gray-solid-urethane-tire-knobby-tread-invacare_2.jpg?v=1774752610"},{"product_id":"6x2-invacare-caster-wheel","title":"6\"x2\" AeroFlex Caster Wheel Assembly with 2-Rib Tread for Invacare Power Chairs with 2-Sided Forks (1115179)","description":"The 6\"x2\" caster wheel assembly for Invacare power chairs includes a solid urethane tire and a set of pre-installed caster wheel bearings.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This caster wheel is for use on power chairs with 2-sided forks such as the Pronto M41, M51, M71, M91, and some later TDX series chairs. Please refer to the Compatibility list to see which Invacare power chairs use this caster assembly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1115179","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337038983330,"sku":"G36-4380","price":62.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc06886.jpg?v=1774794581"},{"product_id":"143intustvas","title":"14\"x3\" (3.00-8) Scooter and Power Chair Tube with Straight Valve Stem","description":"\u003cp\u003e14\"x3\" (3.00-8) inner tube with a straight valve stem. This tube is typically used in the center drive wheel for many different models of power chairs.\u003cbr\u003e\u003cbr\u003eThis tube fits many Invacare and Jazzy power chair models. May also be compatible with other mobility scooter models.\u003c\/p\u003e\n\u003cp\u003eDue to differences in manufactures, these tubes can be marked as either 14\"x3\", 3.00-8, 3.00\/3.25-8, 2.75\/3.00-8, 13\"x3\", or 100\/55-10. These can all be used interchangeably. However, please note 14\"x3\" is NOT the same size as 3.00-14, nor 14x3.0. This tube can be found at the link below. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/monstorscooterparts.shop\/products\/3-14-inner-tube?_pos=1\u0026amp;_psq=J45-5326\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"90\/100-14 (3.00-14) Inner Tube for Dirt Bikes\"\u003e90\/100-14 (3.00-14) Inner Tube for Dirt Bikes\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese will NOT FIT eWheels models\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337089773730,"sku":"J45-5308","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/j45-5308_1.jpg?v=1774811788"},{"product_id":"143intu90dev","title":"14\"x3\" (3.00-8) Scooter and Power Chair Tube with 90 Degree Valve Stem","description":"\u003cp\u003e14\"x3\" (3.00-8) inner tube with 90-degree angled valve stem is used in many applications including mobility scooters and power chairs. This tube is typically used in the center drive wheel for many different models of power chairs.\u003cbr\u003e\u003cbr\u003eThis tube fits many Invacare and Jazzy power chair models. May also be compatible with other mobility scooter models. Note: These will not fit eWheels models.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDue to differences in manufactures, these tubes can be marked as either 14\"x3\", 3.00-8, 3.00\/3.25-8, 3.25\/3.00-8, 2.75\/3.00-8, 13\"x3\", or 100\/55-10. These can all be used interchangeably. However, please note 14\"x3\" is NOT the same size as 3.00-14.\u003c\/span\u003e\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337089839266,"sku":"J45-5306","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/j45-5306_1.jpg?v=1774812111"},{"product_id":"joystick-knob-for-dynamic-joystick-remotes-shark-spj-and-a-series","title":"Joystick Knob for Dynamic Joystick Remotes (Shark, SPJ+, and A-Series)","description":"Replace your missing or worn out joystick knob with this replacement joystick knob for most joystick remotes manufactured by Dynamic Controls.\u003cbr\u003e\n\u003cbr\u003e\nCompatible models include the Dynamic Shark, SPJ+, A-Series, and other Dynamic joystick remotes used on many brands of power chairs including Invacare, Golden Technologies, ActiveCare, Jazzy, Pacesaver, Shoprider, more.\u003cbr\u003e\n\u003cbr\u003e\nPlease see the Compatibility tab for a full list of compatible power chair models. Please note that some models had different joystick options and could use either this joystick knob or the \u003ca href=\"joystickknob-vsi.html\"\u003eJoystick Knob for PG Drives Joystick Controllers\u003c\/a\u003e, depending on the joystick controller used. Each joystick knob has a distinct shape, so if your joystick knob looks like the one pictured here, this is most likely the correct replacement.\u003cbr\u003e\n\u003cbr\u003e\nInstallation is a snap - simply twist off your old, worn joystick knob and push your new one on in its place.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility (Jazzy)\u003c\/b\u003e: PLSKNCP1054\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: 82186\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1040217\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: 1329-00700-02\u003cbr\u003e\n\u003cb\u003ePaceSaver\u003c\/b\u003e: MBC-DSJK","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337501274274,"sku":"P49-8685","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8685_1.jpg?v=1774576281"},{"product_id":"18-black-right-side-back-cane-assembly-with-10-degree-bend-for-invacare-pronto-m50-m51-m79-m91-power-chairs","title":"18\" Black Right Side Back Cane Assembly with 10 Degree Bend for Invacare Pronto M50, M51, M79, \u0026 M91 Power Chairs (1133826)","description":"\u003cp\u003eThe 18\" black right side back cane assembly with 10 degree bend for Invacare Pronto M50, M51, M79, and M91 are used with those model power chairs with a solid seat pan. The cane provides an attendant to manually push the chair.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1133826","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337566744738,"sku":"Q76-0007","price":79.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-0007_2.jpg?v=1774582480"},{"product_id":"swing-away-leg-rest-assembly-for-the-invacare-pronto-series-power-chairs-with-18-front-rigging-frame","title":"Swing-away Leg Rest Assembly for the Invacare Pronto Series Power Chairs with 18\" Front Rigging Frame","description":"This set of two swing-away leg rest assembly for the Invacare Pronto series power chairs with an 18\" front rigging frame width is a complete set of two leg rests, one for the left side and one for the right. Each side set includes the upper and lower pieces, as well as the steel connecting pin\n(mounting tube slide) that allows height adjustments. The footrests are plastic composite foot plates.\n\u003cbr\u003e\u003cbr\u003e\nInvacare offers this option on all of their current Pronto series power chairs as well as their TDXSP, TDXSR, and TDXSI series chairs with 18\" front rigging frame widths.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: PWH93","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574281378,"sku":"Q76-1995","price":307.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-1995_1.jpg?v=1774583611"},{"product_id":"rear-caster-wheel-assembly-invacare-pronto-r2-oem","title":"6\"x2\" Caster Wheel Assembly for Invacare Power Chairs (1122066)","description":"\u003cp\u003eThis front and rear caster wheel assembly is manufactured directly by Invacare Corporation, and is designed for use with many Invacare power chairs like the Pronto R2 power chair. Please refer to the Compatibility tab for a complete list of Invacare power chairs that use this front and rear caster assembly.\u003cbr\u003e\u003cbr\u003eWhen ordering this assembly you will receive one 6\" x 2\" urethane deep profile wheel, two 1607-RS bearings, and one 7\/16\" x 5\/8\" x 1-3\/4\" bearing spacer.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1122066","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574346914,"sku":"Q76-8320","price":44.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc01031_-_mockup_2_3276294.jpg?v=1774583621"},{"product_id":"extension-cable-invacare-pronto","title":"0.9 Meter Joystick Extension Cable for Dynamic Shark and SPJ+ Joysticks","description":"This joystick extension cable for Invacare power chairs is compatible with SPJ+, SPJ+ with PSS, and the SPJ+ with ACC joysticks.\u003cbr\u003e\n\u003cbr\u003e\nSome models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91.\u003cbr\u003e\n\u003cbr\u003e\nThis extension cable has one male and one female end and connects the \u003ca href=\"joystick-cable-invacare-pronto.html\"\u003ejoystick cable\u003c\/a\u003e to the controller. \u003ca href=\"joystick-cable-invacare-pronto.html\"\u003eJoystick cable\u003c\/a\u003e sold separately.\u003cbr\u003e\n\u003cbr\u003e\nCable measures approximately 35\" (0.9 meters) in length.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1116404\u003cbr\u003e\n\u003cb\u003eDynamic Controls\u003c\/b\u003e: GSM80231","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574445218,"sku":"Q76-8327","price":60.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/extension-cable-invacare-pronto_3.jpg?v=1774583653"},{"product_id":"joystick-cable-invacare-pronto","title":"1.0 Meter Dynamic Joystick Bus Cable for Invacare Power Chairs with SPJ+ Joystick Controllers","description":"The joystick bus cable for Invacare power chairs is compatible with SPJ+, SPJ+ with PSS, and the SPJ+ with ACC joysticks.\u003cbr\u003e\u003cbr\u003eSome models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91.\u003cbr\u003e\u003cbr\u003eThis cable has two male ends and runs from the joystick to the \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e which will need to be purchased separately. The \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e will then run from the joystick cable to the controller.\u003cbr\u003e\u003cbr\u003e\nThis is a male-to-male cable with male ends on both ends of the cable.\u003cbr\u003e\u003cbr\u003e\nThe cable measures approximately 40\" (1 meter) in length.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eDynamic\u003c\/b\u003e: GSM80234\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1127293","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574576290,"sku":"Q76-8326","price":60.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8227_1_2.jpg?v=1774583672"},{"product_id":"full-length-urethane-arm-pad-invacare-pronto-m61-sure-step","title":"Full Length Urethane Armrest Pad for Invacare Power Chairs (1139924)","description":"The full length black urethane armrest pad for Invacare power chairs is a convenient and easy to clean item that is simple to install on your Invacare chair. Measuring 15\" long by 2-5\/8\" wide, this longer armrest provides the user with the arm support they need.\u003cbr\u003e\u003cbr\u003e\nBecause many customers prefer a shorter 12\" armpad on the joystick side, and a longer 15\" armpad on the opposite side, these armrest pads are sold individually.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1139924","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574772898,"sku":"Q76-8339","price":41.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8339_1.jpg?v=1774583292"},{"product_id":"full-length-urethane-arm-pad-invacare-pronto-m61-sure-step-q76-8339-x01","title":"Full Length Urethane Armrest Pad for Invacare Power Chairs (Blemished)","description":"The full length black urethane armrest pad for Invacare power chairs is a convenient and easy to clean item that is simple to install on your Invacare chair. Measuring 15\" long by 2-5\/8\" wide, this longer armrest provides the user with the arm support they need.\u003cbr\u003e\u003cbr\u003e\nBecause many customers prefer a shorter 12\" armpad on the joystick side, and a longer 15\" armpad on the opposite side, these armrest pads are sold individually.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1139924","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574838434,"sku":"Q76-8339-X01","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8339_1_1.jpg?v=1774583301"},{"product_id":"full-waterfall-arm-pad-hardware-invacare-pronto-m91-surestep","title":"Full Length Waterfall Armrest Pads for Invacare Power Chairs (Set of 2) (1110818)","description":"Set of two full waterfall arm pads with hardware for the Invacare Pronto M51 with SureStep and the Invacare Pronto M91 with SureStep.\u003cbr\u003e\n\u003cbr\u003e\nEach black urethane armrest measures 13\" in length, 2-5\/8\" wide, and are equally suitable for either the right or left side of the power chair. This armrest set includes the mounting screws.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1110818","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337575198882,"sku":"Q76-8341","price":177.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8341_1.jpg?v=1774583340"},{"product_id":"armpad-pads-desk-length-invacare-pronto-m61","title":"Desk Length Waterfall Armrest Pads for Invacare Power Chairs (Set of 2) (1110817)","description":"\u003cp\u003eSet of 2 desk length waterfall armrest pads for Invacare power chairs. Each arm pad includes two (2) mounting screws, and is 9\" long by 2-5\/8\" wide.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1110817","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337575297186,"sku":"Q76-8348","price":174.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8348_1.jpg?v=1774583358"},{"product_id":"full-length-waterfall-armrest-for-invacare-power-chairs","title":"Full Length Waterfall Armrest for Invacare Power Chairs (1117328)","description":"Black full length waterfall armrest kit for Invacare Pronto power chairs.\u003cbr\u003e\n\u003cbr\u003e\nThese black urethane armrests measure 13\" in length, 2-5\/8\" wide, and are equally suitable for either the right or left side of the power chair. This single armrest comes complete with mounting screws.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1117328","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337575329954,"sku":"Q76-8350","price":95.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8350_1.jpg?v=1774583365"},{"product_id":"desk-length-urethane-armrest-pad-for-invacare-power-chairs","title":"Desk Length Urethane Armrest Pad for Invacare Power Chairs (1139923)","description":"The desk length black urethane armrest pad for Invacare power chairs is a convenient and easy to clean item that is simple to install on your Invacare chair. Measuring 12-1\/4\" long by 2-5\/8\" wide, this shorter armrest allows the user to get their chair closer to work surfaces, keyboards, tables, and the other necessities of modern life.\u003cbr\u003e\u003cbr\u003e\nBecause many customers prefer a shorter armpad on the joystick side, and a longer armpad on the opposite side, these armrest pads are sold individually.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1139923","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337575624866,"sku":"Q76-8370","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/desk-urethane-armrest-invacare_1.jpg?v=1774583686"},{"product_id":"spj-joystick-invacare","title":"SPJ+ Joystick for Invacare Power Chairs (1127291)","description":"Model SPJ+ joystick controller for several different models of Invacare power chairs. The Dynamic SPJ+ is externally very similar to the Dynamic Shark joystick remote, however they are not the same, nor are they interchangeable. Please check the compatibility tab for a full list of all compatible models.\u003cbr\u003e\u003cbr\u003e\nThis is a genuine Dynamic Controls joystick controller. However, please note that it may arrive without the Invacare logo printed on the keypad. Does not include the joystick bus cable.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1127291","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576018082,"sku":"Q76-8391","price":733.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc00016_-_mockup_1_3058907.jpg?v=1774583712"},{"product_id":"keypad-spj-joystick-invacare","title":"Keypad for Invacare SPJ+ Joystick Controllers","description":"Replacement keypad for SPJ+ joystick controllers which are most commonly found on the Invacare Pronto series power chairs as well as several other Invacare power wheelchairs. For a complete list of compatible models, please see our compatibility tab.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1165094","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576247458,"sku":"Q76-8421","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-9087_1_1.jpg?v=1774583755"},{"product_id":"mk-iv-joystick-invacare-pronto-m91","title":"MKIV A Joystick Controller with Speed Potentiometer for Invacare Power Chairs (1065944)","description":"\u003cp\u003eMK IV joystick controller with speed potentiometer for Invacare power chairs.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1065944","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576542370,"sku":"Q76-8434","price":724.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/mk-iv-joystick-invacare-pronto-m91_1.jpg?v=1774583838"},{"product_id":"5-8-99502h-caster-stem-bearing-for-invacare-power-chairs","title":"5\/8\" (99502H) Caster Stem Bearing for Invacare Power Chairs (40117X006)","description":"\u003cp\u003eThis 5\/8\" caster stem bearing for Invacare power chairs is also known as a 99502H bearing. It is used on most Invacare power chair models such as the Pronto, Nutron, and TDX series.\u003cbr\u003e\u003cbr\u003eUnlike a wheel bearing which allows the wheel to spin on its axle, the caster stem bearing allows the caster fork to pivot.\u003cbr\u003e\u003cbr\u003ePlease note that this caster stem bearing is sold by the single piece and not in a set of two.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 40117X006\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576575138,"sku":"Q76-8435","price":8.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc01157_-_mockup_1_3312778.jpg?v=1774583841"},{"product_id":"desk-waterfall-armrest-pad-invacare","title":"Desk Length Waterfall Armrest Pad for Invacare Power Chairs (1117327)","description":"Desk length waterfall armrest pad for Invacare power chairs. This armrest pad includes two (2) mounting screws, and is 9\" long by 2-5\/8\" wide.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1117327","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576804514,"sku":"Q76-8444","price":79.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8444_1.jpg?v=1774583428"},{"product_id":"drive-rim-invacare-m94","title":"Drive Rim for the Invacare M94 (1104882)","description":"This sharp-looking drive rim for the Invacare M94 is also usable on several other Invacare power chairs, so please refer to the Compatibility tab before ordering.\u003cbr\u003e\n\u003cbr\u003e\nMade for the popular 14\"x3\" (3.00-8) tires size. Monster Scooter Parts carries several Invacare OEM tires and complete wheel assemblies in this size.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1104882","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576837282,"sku":"Q76-8445","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/drive-rim-invacare-m94..jpg?v=1774583439"},{"product_id":"footboard-invacare-m41-m91","title":"Footboard with Cover for Invacare AVIVA FX, Pronto M41, and Pronto M91 Power Chairs (1114311)","description":"\u003cp\u003eHere is the footboard with cover for Invacare AVIVA FX, Pronto M41, and Pronto M91 power chairs. The rubber cover comes pre-installed on the metal footboard.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1114311","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337576935586,"sku":"Q76-8449","price":440.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/footboard-invacare-m41-m91_2.jpg?v=1774583460"},{"product_id":"7-8-black-plug-button-for-invacare-power-chairs-wheelchairs","title":"7\/8\" Black Plug Button for Invacare Power Chairs \u0026 Wheelchairs","description":"The humble 7\/8\" black plug button is used on almost all Invacare power chair models. Invacare uses this same little plastic plug as their joystick tube end plug, an armrest tube end plug, a footrest and leg rest tube end plug... and more. Everywhere that Invacare uses 7\/8\" diameter hollow tubing, they cap it off with this plug.\n\u003cbr\u003e\u003cbr\u003e\nWhether you have a Pronto series chair, a Storm series, TDX series, a Nutron, or any other Invacare brand power chair or wheelchair, the 7\/8\" plug is an often overlooked component part.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1027095","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577033890,"sku":"Q76-8466","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/g45-6759_1_1_1.jpg?v=1774583472"},{"product_id":"motor-brush-cap-assembly-for-invacare-power-chairs-with-4-pole-motors","title":"Motor Brush \u0026 Cap Assembly for Invacare Power Chairs with 4-Pole Motors","description":"Rejuvenate your Invacare power chair with our motor brush \u0026amp; cap assembly for Invacare power chairs with 4-pole motors. When it's time to replace the motor brushes on your Invacare power chair, Monster Scooter Parts has this set of four motor brushes and four motor brush caps for a number of Invacare models. Motor brushes are a very simple but vital part of an electric scooter's direct current (DC) motor system. Composed of highly compressed graphite powder and copper wiring, this motor brush is made to exacting tolerances.Please refer to the Compatibility list to see if these are the correct motor brush and cap combination for your Invacare power chair.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e These motor brushes are only compatible with Invacare 4-pole motors made before March of 2011.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1070296","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577230498,"sku":"Q76-8476","price":182.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8476_1.jpg?v=1774583490"},{"product_id":"joystick-skirt-for-dynamic-joystick-remotes-shark-spj-and-a-series","title":"Joystick Skirt for Dynamic Joystick Remotes (Shark, SPJ+, and A-Series) (1040218)","description":"The joystick skirt for Dynamic joystick controllers fits the Shark, the SPJ+, and the A-Series joysticks found on many of today's popular power chair models. This joystick skirt is the black rubber piece that fits under the joystick knob, and it may also be called a joystick boot. The skirt protects the delicate electronics in the joystick's gimbal while remaining pliable enough to ensure easy movement.\u003cbr\u003e\u003cbr\u003e\nIn addition to the power chair models listed in our Compatibility list, this joystick skirt fits the same controllers that is used on a large number of Golden Technologies, Invacare, Jazzy, Quantum, Pacesaver wheelchairs plus numerous other brands. Regardless of which power wheelchair you have, if it uses a Dynamic Shark, SPJ+, A-Series, or other Dynamic joystick controller, it uses this joystick controller skirt.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1040218","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577296034,"sku":"Q76-8487","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-boot-skirt-dynamic-joystick-controllers.jpg?v=1774583492"},{"product_id":"arm-tube-assembly-with-plug-buttons-full-length-black-right-left-invacare-m91","title":"Full Length Arm Tub for the Invacare Pronto Series Power Chairs (1071253)","description":"The full-length arm tube for the Invacare Pronto series power chair is made to be used on either the left or the right side of the chair. This 16-1\/8\" black steel armrest tube comes with a pair of plug buttons and is pre-drilled for the arm pad's mounting bolts, and five height adjustment holes on each of the two vertical legs.\n\u003cbr\u003e\u003cbr\u003e\nYou can use this tube on a wide range of Invacare power chair models including the Pronto M50, M51, M71, M91, M94, and the Pronto R2. \n\u003cbr\u003e\u003cbr\u003e\n In addition, this arm tube is compatible with a multiplicity of Invacare armrest pad models.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1071253","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577459874,"sku":"Q76-8490","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8490_1.jpg?v=1774583528"},{"product_id":"invacare-joystick-cmpjm6","title":"CMPJ+ (CMPJM6) Joystick with Colored Display for Invacare Power Chairs (1164361)","description":"Invacare says that their CMPJ+ (CMPJM6) joystick with colored display is compatible with all Invacare power chairs using MK6i electronics.\u003cbr\u003e\n\u003cbr\u003e\nThe use of a color display on the CMPJ+ joystick does more than simply provide improved aesthetics. Color is employed to the user's advantage as it will help designate drive mode and status. New icons are easier to view and more intuitive to understand, and background colors are even programmable to allow choice for viewing indoors and outdoors.\u003cbr\u003e\n\u003cbr\u003e\nThe features of this CMPJ+ joystick include a real time clock and improved battery diagnostics. All of the functions of the earlier MPJ+ joystick remain, including the easy to use on\/off drive select switch, ergonomically designed speed control dial, two switch ports, SD card capability, full programmability and easy to access charger port.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1164361","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577885858,"sku":"Q76-8489","price":1074.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8489_1.jpg?v=1774583532"},{"product_id":"spj-joystick-with-cable-for-the-invacare-pronto-m50-m51-and-m71-power-chairs","title":"SPJ+ Joystick with Cable for the Invacare Pronto M50, M51, and M71 Power Chairs","description":"Save money with our SPJ+ joystick controller with cable for the Invacare Pronto M50, M51, and M71 with Surestep. This unit includes the cable, and is a direct Invacare factory replacement for the discontinued Invacare Mk5 joystick controller (Invacare 1116394).\u003cbr\u003e\u003cbr\u003e\nIn order to determine compatibility, please check your serial number with those listed in the compatibility tab.\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e The Dynamic SPJ+ is externally very similar to the Dynamic Shark joystick remote, however they are not the same, nor are they interchangeable.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1153650","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577984162,"sku":"Q76-8502","price":776.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/spj-joystick-invacare-pronto_4.jpg?v=1774583567"},{"product_id":"5-16-18x1-25-hex-bolt-for-the-armrest-adjustment-on-the-invacare-pronto-series","title":"5\/16-18x1.25 Hex Bolt for the Armrest Adjustment on the Invacare Pronto Series (1104257)","description":"This 5\/16-18x1.25 hex bolt for the armrest adjustment on the Invacare Pronto series power chairs.\n\u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This hex bolt regulates the height angle and acts as a vertical stopper. It is not the pivot bolt that allows the armrest assembly to swivel.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1104257","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337578836130,"sku":"Q76-8535","price":14.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8535_1.jpg?v=1774584488"},{"product_id":"fork-stem-assembly-invacare-pronto-m51-m91-surestep","title":"Fork and Stem Assembly for the Invacare Pronto M51 and M91 with SureStep","description":"If you have an Invacare Pronto M51 or M91 with SureStep, you know just how important those caster forks are. If they are bent, rusty or worse, it means a very unsafe ride. With the fork and stem assembly, you can quickly get them looking brand new again.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 110683","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337578868898,"sku":"Q76-8551","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8551_1.jpg?v=1774584490"},{"product_id":"1-5-meter-60-bus-cable-for-invacare-power-chairs-with-spj-joystick-controllers","title":"1.5 Meter (60\") Bus Cable for Invacare Power Chairs with SPJ+ Joystick Controllers","description":"\u003cp\u003e1.5 Meter (60\") joystick bus cable for Invacare power chairs is compatible with SPJ+, SPJ+ with PSS, and the SPJ+ with ACC joysticks. This is a male-to-male cable with male ends on both ends of the cable.\u003cbr\u003e\u003cbr\u003eSome models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91. Please see the Compatibility list to see all of the Invacare power chairs that can use this bus cable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003eThis double male end cable runs from the joystick to the \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e which will need to be purchased separately. The \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e will then run from the joystick cable to the controller.\u003cbr\u003e\u003cbr\u003eThe cable measures approximately 1.5 meter (60\") long.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1133165\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337579393186,"sku":"Q76-8603","price":29.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8227_3_2.jpg?v=1774584577"},{"product_id":"spj-joystick-keypad","title":"Keypad for the SPJ+ Joystick Controller with Accessories","description":"\u003cp\u003eIf you need a new replacement keypad for the SPJ+ joystick controller with accessories, Monster Scooter Parts has what you need. Model SPJ+ joystick controller is used on several different models of Invacare power chairs.\u003cbr\u003e\u003cbr\u003eThis keypad differs from the standard \u003ca href=\"keypad-spj-joystick-invacare.html\"\u003eKeypad for SPJ+ Joysticks\u003c\/a\u003e in that this keypad includes buttons for two actuators (sometimes referred to as \"accessories\").\u003cbr\u003e\u003cbr\u003ePlease check the compatibility tab for a full list of all compatible models.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e1. Ensure the wheelchair power is turned off.\u003cbr\u003e2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage. 5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e10. Remove the backing from the new keypad.\u003cbr\u003e11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e15. Connect the joystick cable to the joystick.\u003cbr\u003e16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare pert number:\u003c\/b\u003e 1165093\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337579655330,"sku":"Q76-8615","price":61.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/spj-joystick-keypad_1.jpg?v=1774583963"},{"product_id":"dual-function-switch-mk6i","title":"Dual Function Tilt Toggle Switch for Invacare Power Chairs with MK6i Electronics (1142221)","description":"Sometimes called a \"tilt joystick\", the dual function toggle switch for MK6i electronics is used ti operate the incline\/recline actuator on a number of Invacare power chair models. Please refer to the Compatibility list before ordering.\u003cbr\u003e\n\u003cbr\u003e\nPlease note that this switch is not compatible with SPJ+ joysticks.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1142221","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337582211234,"sku":"Q76-8810","price":297.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dual-function-switch-mk6i_2.jpg?v=1774584095"},{"product_id":"14-3-foam-drive-wheel-after-oct-2001","title":"14\"x3\" (3.00-8) Foam-Filled Drive Wheel Assembly for Invacare Power Chairs Manufactured After 10\/18\/01 (1104437)","description":"\u003cp\u003eFoam-filled drive wheel assembly for Invacare power chairs. This foam-filled wheel assembly measures 14\"x3\" with an 8\" rim and is only compatible with Invacare power chairs manufactured after 10\/17\/01. These can quickly be identified by their rims with four mounting holes. Foam filled tires are also known as \"flat free\" or \"solid\" tires.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e If your Invacare power chair was made \u003cb\u003eafter 08\/16\/10\u003c\/b\u003e, and has a 5-hole rim, then you will want the \u003ca href=\"http:\/\/www.monstorscooterparts.shop\/114-x3-3-00-8-drive-wheel-assembly-for-invacare-storm-3g-series-power-chairs.html\"\u003e14\"x3\" (3.00-8) Foam-Filled Drive Wheel Assembly for Invacare Power Chairs Manufactured After 08\/16\/10\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1104437\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337582571682,"sku":"Q76-8818","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/14-3-foam-drive-wheel-after-oct-2001_2.jpg?v=1774584122"},{"product_id":"14-x3-3-00-8-pneumatic-drive-wheel-assembly-for-invacare-power-chairs-manufactured-after-10-18-01","title":"14\"x3\" (3.00-8) Pneumatic Drive Wheel Assembly for Invacare Power Chairs Manufactured After 10\/18\/01 (1104438)","description":"Pneumatic drive wheel assembly for Invacare power chairs. This pneumatic wheel assembly measures 14\"x3\" with an 8\" rim and is only compatible with Invacare power chairs manufactured after 10\/17\/01.\n\u003cbr\u003e\u003cbr\u003e\nPlease note that this Invacare wheel assembly's rim is of a split rim design (the bolts are on the backside of the rim), and the tire can be replaced without replacing the entire assembly. For a MUCH more affordable solution, please find the tire at the link below:\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003e\u003ca href=\"http:\/\/www.monstorscooterparts.shop\/143pnmotuti.html\"\u003e14\"x3\" (3.00-8) Pneumatic Mobility Turf Tire with Powertrax Knobby Tread\u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1104438","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337582637218,"sku":"Q76-8819","price":236.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8819_1.jpg?v=1774584131"},{"product_id":"cane-holder-invacare","title":"Cane Holder for Invacare Scooters and Power Chairs (P725)","description":"This useful cane holder for Invacare scooters and power chairs  is designed to fit most any Invacare mobility product.\u003cbr\u003e\n\u003cbr\u003e\nThe frame is strong and durable steel tubing, with a cup on the bottom, and a velcro strap to keep your cane secure.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: P725","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337584930978,"sku":"Q76-8869","price":102.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/cane-holder-invacare_1.jpg?v=1774584816"},{"product_id":"invacare-headtube-cap","title":"Rear Headtube Cap for the Invacare Pronto M50, M51, M61, and M91 (1105026)","description":"A small part indeed, but one that keeps dust, dirt, grit, and corrosion from your caster assemblies. The rear headtube cap for first generation Invacare Pronto M50, M51, M61, and M91 power chairs manufactured prior to January 19, 2005.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePlease note that this cap only fits those Pronto M51 power chairs manufactured prior to January 19, 2005.\u003c\/b\u003e If your power chair was made after that date, you need our second generation \u003ca href=\"http:\/\/www.monstorscooterparts.shop\/invacare-pronto-m50-m51-m91-left-headtube-cap-caster-wheel-assembly-surestep-q76-8323.html\"\u003e Caster Wheel Headtube Cap for the Invacare Pronto M50, M51, M61, and M91\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1105026","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337585029282,"sku":"Q76-8884","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-8884_1.jpg?v=1774584239"},{"product_id":"head-tube-cap-invacare","title":"Head Tube Cap for Invacare AVIVA FX, Pronto M41, M91, \u0026 M94 Power Chairs (1110709)","description":"The little black head tube cap for Invacare AVIVA FX, andPronto Series M41, M91, and M94 power chairs is used on the top of the fork assemblies to seal the dirt and moisture out of the bearings.\u003cbr\u003e\n\u003cbr\u003e\nAlso called a plug button, the cap extends the life of the moving parts in your power chair's caster units.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1110709","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337585094818,"sku":"Q76-8885","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/head-tube-cap-invacare_1.jpg?v=1774584241"},{"product_id":"tolerance-ring-for-the-caster-assembly-on-the-invacare-pronto-m91","title":"Tolerance Ring for the Caster Assembly on the Invacare Pronto M91 (1110717)","description":"\u003cp\u003eThere are several components that make up the caster assembly on your Invacare Pronto M91. If you find the tolerance ring is the culprit of a spasmodic excursion, why buy more than what you need?\u003cbr\u003e\u003cbr\u003eThis is the tolerance ring made just for the caster assembly of the Invacare Pronto M91. Now with a quick dissemble of the caster, and swap of the tolerance ring, you can smooth and straighten your ride.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1110717\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337585979554,"sku":"Q76-8926","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/tolerance-ring-caster-assembly-invacare-pronto-m91_1.jpg?v=1774584326"},{"product_id":"magnetic-actuator-switch-for-invacare-pronto-m505161and-91","title":"Magnetic Actuator Switch for Invacare Pronto M50,51,61,and 91 (1024001)","description":"This is a replacement actuator switch for Invacare Pronto models. This little switch is designed for use on Pronto M50, M51, M61, and M91 models. \n\n\u003cb\u003eNote:\u003c\/b\u003e Please note this does not include any mounting hardware, just the actuator switch.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1024001","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337586208930,"sku":"Q76-8967","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc07080.jpg?v=1774584397"},{"product_id":"armrest-adjustment-knob-for-invacare-pronto-power-chairs","title":"Armrest Adjustment Knob for Invacare AVIVA FX \u0026 Pronto Power Chairs (1114910)","description":"You can fine tune your armrest height and then snug it down tight with an armrest adjustment knob for Invacare AVIVA FX and Pronto power chairs. Invacare uses this handy little knob for the height adjustment on all of their Pronto series chairs except the M71 Jr., and Pronto R2. In addition, Pronto models models (other than the M91 \u0026amp; M94 that use Invacare's  Van Seating) also use this little knob for adjusting the width between the armrest brackets.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1114910","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337586667682,"sku":"Q76-9015","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-9015_1.jpg?v=1774584874"},{"product_id":"flat-washer-for-the-footplate-assembly-for-invacare-pronto-series-power-chairs","title":"Flat Washer for the Footplate Assembly for Invacare Pronto Series Power Chairs (1065214)","description":"\u003cp\u003eThe humble flat washer for the footplate assembly for Invacare Pronto Series power chairs is a fastener that helps hold the footplate assembly together. Some users might think of their chair's washers as the least essential of all the component bits that go into their machine, however, without them, your typical power chair would soon fall apart from vibration loosening the fastening bolts. The washer spreads the bolt and nut's load over a broader area providing the additional \"grip\" that maintains the bolt's tightness.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1065214","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337588338850,"sku":"Q76-9060","price":17.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-9060_1.jpg?v=1774584945"},{"product_id":"m10-1-50x62-mm-black-allen-socket-bolt-1106223","title":"M10-1.50x62 mm Black Allen Socket Bolt (1106223)","description":"\u003cp\u003eHave you lost your Invacare footplate bolt? This M10-1.50x62 mm black Allen socket machine bolt will find its place on the Invacare Pronto M41 and Pronto M91 as well as a wide variety of other applications. This is the fastener that Invacare uses to hold their footplates to the mounting bracket.\u003c\/p\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1106223","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337588404386,"sku":"Q76-9061","price":16.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/footplate-bolt-invacare-m41-m91_2.jpg?v=1774584947"},{"product_id":"footboard-release-pin-invacare-m41-m91","title":"Footplate Push Button Quick Release Pin for the Invacare Pronto M41 and Pronto M91 (1109011)","description":"\u003cp\u003eThe footplate push button quick release pin for the Invacare for the Invacare Pronto M41 and Pronto M91 power chairs is what holds the footplate bracket to the chair.\u003cbr\u003e\u003cbr\u003eThe shaft unlocks with a simple press on the button allowing the pin to be withdrawn.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1109011\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337588437154,"sku":"Q76-9059","price":60.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/q76-9059_3.jpg?v=1774584951"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/collections\/1416.jpg?v=1712354597","url":"https:\/\/monstorscooterparts.shop\/collections\/invacare-pronto-m91-with-surestep.oembed","provider":"Monster Scooter Parts","version":"1.0","type":"link"}