{"title":"Dynamic Joystick Controller Parts","description":null,"products":[{"product_id":"4-key-keypad-for-dynamic-a-series-joystick-controllers","title":"4 Key Keypad for Dynamic A-Series Joystick Controllers (1165880)","description":"Replacement stick-on keypad for the Dynamic A-Series joystick controller used with all ActiveCare power chair models, some versions of the Invacare Pronto M41, and others.\u003cbr\u003e\n\u003cbr\u003e\nIncludes 4 keys (buttons) as follows: power, horn, rabbit, and turtle.\u003cbr\u003e\n\u003cbr\u003e\nThe Dynamic A-Series is a high quality, yet cost-effective, 50 amp integrated controller for power wheelchairs. It offers class-leading drive performance and is ideal for lightweight or folding chairs and drive only applications.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e\n1. Ensure the wheelchair power is turned off.\u003cbr\u003e\n2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e\n3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e\n4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e\n5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e\n6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e\n7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e\n8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e\n9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e\n10. Remove the backing from the new keypad.\u003cbr\u003e\n11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e\n12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e\n13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e\n14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e\n15. Connect the joystick cable to the joystick.\u003cbr\u003e\n16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e\n17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eActiveCare\u003c\/b\u003e: DC GLA81043\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1165880","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44336755114146,"sku":"A29-3707","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/a29-3707_1.jpg?v=1774738162"},{"product_id":"joystick-adjustment-knob-golden-power-chairs","title":"Joystick Adjustment Knob for Golden Technologies Power Chairs","description":"\u003cp\u003eOur joystick adjustment knob is for Golden Technologies power chairs using the Dynamic Shark joystick controller. This is the knob that allows the joystick's mounting bracket to be adjusted in or out to suit the user's arm length.\u003cbr\u003e\u003cbr\u003eAs Golden Technologies has used several joystick models, please refer to the Compatibility tab before ordering.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBH-AAAKNOB (replaces MBH-AJK)\u003c\/p\u003e","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337049796770,"sku":"G45-5347","price":5.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/g45-5347_1.jpg?v=1774802461"},{"product_id":"cable-dynamic-linx","title":"1.5 Meter Dynamic LiNX Joystick Cable for the Golden Technologies Compass Sport (GP605CC\/GP605SS)","description":"Dynamic LiNX joystick extension cable for the Golden Technologies Compass Sport (GP605CC\/GP605SS) power chair. Just replace your damaged or defective joystick cable with this handy part and your power chair will be running like a champion again.\u003cbr\u003e\n\u003cbr\u003e\nThis cable measures approximately 60\" (1.5 meters) in length and is only compatible with the Dynamic LiNX joystick controller.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e This Dynamic LiNX joystick cable is serial number specific, and is only used on some (but not all) Compass Sport power chairs made after April 2014. Please refer to this serial number range for compatible Compass Sport power chairs:\u003cbr\u003e\n\u003cbr\u003e\n\u003cli\u003eSerial numbers CS114E001 through CS114E0192\u003c\/li\u003e\n\u003cli\u003eSerial numbers CS114E0495 and after\u003c\/li\u003e\n\u003cli\u003eIntermediate numbers (-0193 through -0494) used the Dynamic Shark joystick controller and cable\u003c\/li\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBC-605L-CNT-CAB","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337058087074,"sku":"G45-5780","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/g45-5780_1.jpg?v=1774803567"},{"product_id":"joystick-cable-merits-cypress","title":"300mm Dynamic Shark Joystick Extension Cable for the Merits Cypress (P313) Power Chair (63300040)","description":"Dynamic Shark joystick extension cable for the Merits Cypress (P313) power chair. Just replace your damaged or defective joystick cable with this handy part and your power chair will be running like a champion again!\u003cbr\u003e\n\u003cbr\u003e\nThis is a male-to-female cable with one male end and one female end.\u003cbr\u003e\n\u003cbr\u003e\nThis cable measures approximately 11-3\/4\" (300mm) in length from the male end to the female end connectors.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: 63300040\u003cbr\u003e\n\u003cb\u003eDynamic Controls\u003c\/b\u003e: GSM80203","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337305714850,"sku":"M35-4386","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-cable-merits-cypress_2.jpg?v=1774871972"},{"product_id":"joystick-cable-merits-regal","title":"1.2 Meter Dynamic Shark Joystick Extension Cable for the Merits Regal (P310) Power Chair (63300038)","description":"This is the 47\" (1.2 meter) joystick cable for the Merits Regal (P310) power chair. Now you can replace your damaged or defective joystick cable with this OEM part and your power chair will be running like a champion again.\u003cbr\u003e\n\u003cbr\u003e\nThis is a male-to-female cable with one male end and one female end.\u003cbr\u003e\n\u003cbr\u003e\nDynamic calls this their number 3 bus cable.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: 63300038\u003cbr\u003e\n\u003cb\u003eDynamic Controls\u003c\/b\u003e: GSM80232","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337317707938,"sku":"M48-1120","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-cable-merits-regal_2.jpg?v=1774874585"},{"product_id":"inline-joystick-mounting-bracket-for-the-dynamic-linx-remote","title":"Inline Joystick Mounting Bracket for the Dynamic Linx Remote (MEC2002220)","description":"Here we have the inline joystick mounting bracket designed for the Dynamic Linx Remote joystick. This mounting bracket is designed to securely hold your inline joystick while keeping it in a useable and comfortable position. Included are the two mounting screws to attach the joystick to the bracket. This bracket is made of durable steel and comes with a sleek black finish to match your mobility scooter.\u003cbr\u003e\u003cbr\u003e\n\n\u003cb\u003eNote:\u003c\/b\u003e This mounting bracket is designed to work with these part numbers: Pride Mobility: CTL1906943  Dynamic: DLX-REM060-A\u003cbr\u003e\u003cbr\u003e\nYou can find the Dynamic Linx Remote \u003ca href=\"https:\/\/www.monstorscooterparts.shop\/dynamic-linx-joystick-remote-for-the-jazzy-elite-14-hd.html\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: MEC2002220","brand":"Pride Mobility","offers":[{"title":"Default Title","offer_id":44337383768226,"sku":"P49-0482","price":10.74,"currency_code":"USD","in_stock":true}]},{"product_id":"protective-bumper-for-the-dynamic-shark-joystick-controller","title":"Protective Bumper for the Dynamic Shark Joystick Controller (DWR1010D440)","description":"Think of the protective bumper for the Dynamic Shark joystick controller as a very inexpensive insurance policy for your Shark. This protective cover slips easily and fits snugly onto the Shark's case and like a suit of armor, the cover shields the joystick against unexpected bumps, scrapes, scratches, and other hazards.\u003cbr\u003e\u003cbr\u003e\nWith the price of today's replacement mobility electronics, how can you not afford to protect your Dynamic joystick controller with one of these handy bumper\/covers?\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: DWR1010D440","brand":"Monster Scooter Parts","offers":[{"title":"Default Title","offer_id":44337455235234,"sku":"P49-4829","price":5.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-4829_1.jpg?v=1774922938"},{"product_id":"joystick-mounting-bracket-dynamic-shark","title":"Inline Joystick Mounting Bracket for the Dynamic Shark Remote (FRMASMB11349)","description":"The inline joystick mounting bracket for the Dynamic Shark remote was specifically made for use on Jazzy power chairs and may fit some other brands as well.\u003cbr\u003e\n\u003cbr\u003e\nAlthough many Jazzy models have used Dynamic joysticks as either standard equipment, or as an option, please be sure of your joystick type before ordering. See the Compatibility tab for a listing of known Jazzy models that used this bracket.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: FRMASMB11349","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337484333218,"sku":"P49-8226","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-mounting-bracket-dynamic-shark_5.jpg?v=1774574725"},{"product_id":"joystick-mounting-bracket-dynamic-shark-x03","title":"Inline Joystick Mounting Bracket for the Dynamic Shark Remote (Missing Hardware) (FRMASMB11349)","description":"The inline joystick mounting bracket for the Dynamic Shark remote was specifically made for use on Jazzy power chairs and may fit some other brands as well.\u003cbr\u003e\n\u003cbr\u003e\nAlthough many Jazzy models have used Dynamic joysticks as either standard equipment, or as an option, please be sure of your joystick type before ordering. See the Compatibility tab for a listing of known Jazzy models that used this bracket.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: FRMASMB11349","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337485054114,"sku":"P49-8226-X03","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-mounting-bracket-dynamic-shark_5_7.jpg?v=1774574744"},{"product_id":"joystick-harness-dynamic-joysticks","title":"1.5 Meter Bus Cable for Dynamic Joysticks (GSM80233\/MBC-DYNSBC\/1133165\/63300042\/DWR1111H204\/2361-00300-06)","description":"Joystick bus cable for Dynamic Shark joysticks commonly used on power chairs made by Jazzy, Pride, Golden Technologies, Drive, Activecare, Shoprider, Merits, and other manufacturers.\u003cbr\u003e\n\u003cbr\u003e\nThis cable measures approximately 60\" (1.5 meters) in length. Dynamic made this cable with male connectors on both ends.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eDynamic\u003c\/b\u003e: GSM80233\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBC-DYNSBC\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1133165\u003cbr\u003e\n\u003cb\u003eMerits\u003c\/b\u003e: 63300042\u003cbr\u003e\n\u003cb\u003ePride Mobility\u003c\/b\u003e: DWR1111H204\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: 2361-00300-06","brand":"Dynamic","offers":[{"title":"Default Title","offer_id":44337485152418,"sku":"P49-8227","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8227_3_1.jpg?v=1774574755"},{"product_id":"joystick-rubber-boot-dynamic","title":"Joystick Rubber Boot for Dynamic Joystick Controllers (50000X364)","description":"\u003cp\u003eRubber boot for Dynamic joystick controllers. Dynamic controllers are used on a wide range of power chairs, including the Jazzy, Jet, Invacare, PaceSaver, and many other brands of power chairs.\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337501208738,"sku":"P49-8683","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-rubber-boot-dynamic_1.jpg?v=1774576279"},{"product_id":"joystick-knob-for-dynamic-joystick-remotes-shark-spj-and-a-series","title":"Joystick Knob for Dynamic Joystick Remotes (Shark, SPJ+, and A-Series)","description":"Replace your missing or worn out joystick knob with this replacement joystick knob for most joystick remotes manufactured by Dynamic Controls.\u003cbr\u003e\n\u003cbr\u003e\nCompatible models include the Dynamic Shark, SPJ+, A-Series, and other Dynamic joystick remotes used on many brands of power chairs including Invacare, Golden Technologies, ActiveCare, Jazzy, Pacesaver, Shoprider, more.\u003cbr\u003e\n\u003cbr\u003e\nPlease see the Compatibility tab for a full list of compatible power chair models. Please note that some models had different joystick options and could use either this joystick knob or the \u003ca href=\"joystickknob-vsi.html\"\u003eJoystick Knob for PG Drives Joystick Controllers\u003c\/a\u003e, depending on the joystick controller used. Each joystick knob has a distinct shape, so if your joystick knob looks like the one pictured here, this is most likely the correct replacement.\u003cbr\u003e\n\u003cbr\u003e\nInstallation is a snap - simply twist off your old, worn joystick knob and push your new one on in its place.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003ePride Mobility (Jazzy)\u003c\/b\u003e: PLSKNCP1054\u003cbr\u003e\n\u003cb\u003eGolden Technologies\u003c\/b\u003e: 82186\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1040217\u003cbr\u003e\n\u003cb\u003eShoprider\u003c\/b\u003e: 1329-00700-02\u003cbr\u003e\n\u003cb\u003ePaceSaver\u003c\/b\u003e: MBC-DSJK","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337501274274,"sku":"P49-8685","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8685_1.jpg?v=1774576281"},{"product_id":"keypad-4-key-shark-joystick","title":"Keypad for the 4 Key Dynamic Shark DK-REMD01 and DK-REMD02 (MK5 SPJ+) Joystick","description":"\u003cp\u003eReplacement keypad for the 4 key Dynamic Shark DK-REMD01 joystick remote. This part is sometimes referred to as a joystick overlay.\u003cbr\u003e\u003cbr\u003eAlso used on the Invacare MK5 SPJ+ (DK-REMD02) joysticks which are most commonly found on the Invacare Pronto series power chairs as well as several other Invacare power wheelchairs.\u003cbr\u003e\u003cbr\u003eThis remote is used on many power chairs, so please check the Compatibility tab for a listing of known compatible models.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e1. Ensure the wheelchair power is turned off.\u003cbr\u003e2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.\u003cbr\u003e5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e10. Remove the backing from the new keypad.\u003cbr\u003e11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e15. Connect the joystick cable to the joystick.\u003cbr\u003e16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePride Mobility: \u003c\/strong\u003ePLSINDV1264\u003cbr\u003e\u003cb\u003eGolden Technologies\u003c\/b\u003e: MBC-GLA80843\u003cbr\u003e\u003cb\u003eInvacare\u003c\/b\u003e: 1165094\u003cbr\u003e\u003cb\u003ePaceSaver\u003c\/b\u003e: 82674\u003cbr\u003e\u003cb\u003eShoprider\u003c\/b\u003e: 301201-22\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337514741922,"sku":"P49-9087","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-9087_1.jpg?v=1774578120"},{"product_id":"keypad-5-key-dynamic-shark","title":"Keypad with Actuator Buttons for the 5 Key Dynamic Shark DK-REMD11 and MK5 SPJ+ Joystick","description":"\u003cp\u003eReplacement keypad for the 5 key Dynamic Shark DK-REMD11 joystick remote. The 5-key Dynamic Shark is used on the Jazzy 614 and several PaceSaver power chair models. This part is sometimes referred to as a joystick overlay.\u003cbr\u003e\u003cbr\u003eAlso used on the Invacare MK5 SPJ+ \"with accessories\" joysticks.\u003cbr\u003e\u003cbr\u003ePlease check the Compatibility tab for a listing of known compatible models.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstallation Instructions:\u003c\/b\u003e\u003cbr\u003e1. Ensure the wheelchair power is turned off.\u003cbr\u003e2. Pull the gray collar back and disconnect the joystick cable from the joystick.\u003cbr\u003e3. Peel up and remove the existing, damaged keypad from the joystick face plate.\u003cbr\u003e4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and\/or damage.5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.\u003cbr\u003e6. Ensure no adhesive remains around the rim of the joystick face plate.\u003cbr\u003e7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.\u003cbr\u003e8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.\u003cbr\u003e9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.\u003cbr\u003e10. Remove the backing from the new keypad.\u003cbr\u003e11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.\u003cbr\u003e12. Working from the bottom up, gently press the keypad completely into the joystick face plate.\u003cbr\u003e13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.\u003cbr\u003e14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad. \u003cbr\u003e15. Connect the joystick cable to the joystick.\u003cbr\u003e16. Turn on wheelchair power and test the joystick functions.\u003cbr\u003e17. If the joystick does not function properly, you may have a faulty joystick.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInvacare:\u003c\/b\u003e 1165093\u003cbr\u003e\u003cstrong\u003eGolden Technologies:\u003c\/strong\u003e MBC-GLA80842\u003cbr\u003e\u003cb\u003ePaceSaver\u003c\/b\u003e: 82675\u003cbr\u003e\u003cb\u003ePride Mobility\u003c\/b\u003e: PLSINDV1265\u003c\/p\u003e","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337514774690,"sku":"P49-9088","price":61.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/keypad-5-key-dynamic-shark_1.jpg?v=1774578174"},{"product_id":"extension-cable-invacare-pronto","title":"0.9 Meter Joystick Extension Cable for Dynamic Shark and SPJ+ Joysticks","description":"This joystick extension cable for Invacare power chairs is compatible with SPJ+, SPJ+ with PSS, and the SPJ+ with ACC joysticks.\u003cbr\u003e\n\u003cbr\u003e\nSome models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91.\u003cbr\u003e\n\u003cbr\u003e\nThis extension cable has one male and one female end and connects the \u003ca href=\"joystick-cable-invacare-pronto.html\"\u003ejoystick cable\u003c\/a\u003e to the controller. \u003ca href=\"joystick-cable-invacare-pronto.html\"\u003eJoystick cable\u003c\/a\u003e sold separately.\u003cbr\u003e\n\u003cbr\u003e\nCable measures approximately 35\" (0.9 meters) in length.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1116404\u003cbr\u003e\n\u003cb\u003eDynamic Controls\u003c\/b\u003e: GSM80231","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574445218,"sku":"Q76-8327","price":60.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/extension-cable-invacare-pronto_3.jpg?v=1774583653"},{"product_id":"joystick-cable-invacare-pronto","title":"1.0 Meter Dynamic Joystick Bus Cable for Invacare Power Chairs with SPJ+ Joystick Controllers","description":"The joystick bus cable for Invacare power chairs is compatible with SPJ+, SPJ+ with PSS, and the SPJ+ with ACC joysticks.\u003cbr\u003e\u003cbr\u003eSome models that are known to have this joystick controller and that would need this cable are Invacare Pronto models M41, M50, M51, M61, M71 and M91.\u003cbr\u003e\u003cbr\u003eThis cable has two male ends and runs from the joystick to the \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e which will need to be purchased separately. The \u003ca href=\"extension-cable-invacare-pronto.html\"\u003eextension cable\u003c\/a\u003e will then run from the joystick cable to the controller.\u003cbr\u003e\u003cbr\u003e\nThis is a male-to-male cable with male ends on both ends of the cable.\u003cbr\u003e\u003cbr\u003e\nThe cable measures approximately 40\" (1 meter) in length.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eDynamic\u003c\/b\u003e: GSM80234\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1127293","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337574576290,"sku":"Q76-8326","price":60.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/p49-8227_1_2.jpg?v=1774583672"},{"product_id":"joystick-skirt-for-dynamic-joystick-remotes-shark-spj-and-a-series","title":"Joystick Skirt for Dynamic Joystick Remotes (Shark, SPJ+, and A-Series) (1040218)","description":"The joystick skirt for Dynamic joystick controllers fits the Shark, the SPJ+, and the A-Series joysticks found on many of today's popular power chair models. This joystick skirt is the black rubber piece that fits under the joystick knob, and it may also be called a joystick boot. The skirt protects the delicate electronics in the joystick's gimbal while remaining pliable enough to ensure easy movement.\u003cbr\u003e\u003cbr\u003e\nIn addition to the power chair models listed in our Compatibility list, this joystick skirt fits the same controllers that is used on a large number of Golden Technologies, Invacare, Jazzy, Quantum, Pacesaver wheelchairs plus numerous other brands. Regardless of which power wheelchair you have, if it uses a Dynamic Shark, SPJ+, A-Series, or other Dynamic joystick controller, it uses this joystick controller skirt.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eInvacare\u003c\/b\u003e: 1040218","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337577296034,"sku":"Q76-8487","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-boot-skirt-dynamic-joystick-controllers.jpg?v=1774583492"},{"product_id":"5-3-4-goalpost-handle-joystick-extension-for-invacare-power-chairs","title":"5-3\/4\" Goalpost Handle Joystick Extension for Invacare Power Chairs (622321)","description":"5-3\/4\" goalpost handle joystick extension for Invacare power chairs. Fits most Invacare, or other units using a 3\/8\" diameter shaft. Please note that the 5-3\/4\" measurement is the total length of the handle. Check the Specifications tab for a more comprehensive list of measurements.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642176674,"sku":"S73-8213","price":85.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/dsc00814_-_mockup_1_3221513.jpg?v=1774591510"},{"product_id":"4-3-4-round-knob-joystick-extension-for-invacare-power-chairs","title":"4-3\/4\" Round Knob Joystick Extension for Invacare Power Chairs","description":"4-3\/4\" round knob joystick extension for Invacare power chairs. Fits most Invacare, or other units using a 3\/16\" diameter shaft.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642143906,"sku":"S73-8210","price":56.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/round-knob-joystick-extension_1.jpg?v=1774591934"},{"product_id":"4-1-2-brake-tip-joystick-extension-for-invacare-power-chairs","title":"4-1\/2\" Brake Tip Joystick Extension  for Invacare Power Chairs (622301)","description":"4-1\/2\" brake tip joystick extension for Invacare power chairs. Fits most Invacare, or other units using a 3\/16\" diameter shaft.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642209442,"sku":"S73-8211","price":68.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/brake-tip-joystick-extension_1.jpg?v=1774591936"},{"product_id":"5-1-2-goalpost-handle-joystick-extension-with-spring-for-invacare-power-chairs","title":"5-1\/2\" Goalpost Handle Joystick Extension with Spring for Invacare Power Chairs (TAG622341)","description":"5-1\/2\" goalpost handle joystick extension with spring for Invacare power chairs. Fits most Invacare, or other units using a 3\/16\" diameter shaft.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642406050,"sku":"S73-8214","price":101.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/5-50-invacare-goalpost-joystick-extension_1.jpg?v=1774591556"},{"product_id":"4-1-4-t-handle-joystick-extension-for-invacare-power-chairs","title":"4-1\/4\" T-Handle  Joystick Extension for Invacare Power Chairs (622361)","description":"4-1\/4\" T-handle joystick extension for Invacare power chairs. Fits most Invacare, or other units using a 3\/16\" diameter shaft.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642438818,"sku":"S73-8215","price":73.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/s73-8215_1.jpg?v=1774591558"},{"product_id":"4-t-handle-joystick-extension-with-spring-for-invacare-power-chairs","title":"4\" T-Handle Joystick Extension with Spring for Invacare Power Chairs (622381)","description":"4\" T-handle joystick extension for Invacare power chairs. Fits most Invacare, or other units using a 3\/16\" diameter shaft.\u003cbr\u003e\n\u003cbr\u003e\nIncludes the set screws and an Allen wrench.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642471586,"sku":"S73-8216","price":93.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/4-invacare-t-handle-joystick-extension_1.jpg?v=1774591562"},{"product_id":"ball-joystick-knob-for-invacare-power-chairs","title":"Ball Joystick Knob for Invacare Power Chairs (1006191)","description":"Our ball joystick knob for Invacare power chairs will not only fit Invacare models, but may work with E\u0026amp;J, Quickie and any other units with 3\/16\" joystick shaft.\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Power chair brands often used different joysticks and gimbals for different production runs, even for chairs bearing the same model numbers. Please refer to your old joystick's shaft diameter for an exact match before ordering.","brand":"Invacare","offers":[{"title":"Default Title","offer_id":44337642733730,"sku":"S73-8223","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/6943\/0690\/files\/joystick-knob-ball_2.jpg?v=1774591588"}],"url":"https:\/\/monstorscooterparts.shop\/collections\/dynamic-dynamic-joystick-parts.oembed","provider":"Monster Scooter Parts","version":"1.0","type":"link"}